Saturday, May 23, 2009

Summertime Fun

Clicking on the image will enlarge to full view.

Supplies
1 tube of choice - I’m using the artwork of Jessica Dougherty which you can purchase here
Tropical Image provided here or use one of your own
Font of Choice - I’m using Dragonfly here
Weescotlass Mask 193 here
“Summer Time” is a taggers size scrap kit created by Julie of Bits ’n Bobs and can be purchased here. You can visit her blog here.
Thank you Julie for such a fun summer kit!!

This tutorial was written assuming you have working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 X 700 blank canvas. Flood fill white.

Copy and paste Frame 3 as a new layer.

Use your Magic Wand and click inside of each square.
Selections/Modify/Expand by 6

Copy and paste a paper of choice as a new layer beneath the frame.
Selections/Invert
Hit the delete button.

Copy and paste the image provided as a new layer.
Resize 200%
Tap the delete button.
Deselect.

Close out your white canvas.
Merge Visible.

Reopen your white canvas and highlight it. New Raster Layer. Select All.
Copy and paste a paper of choice Into Selection.
Select none.
Apply the mask. Merge Group.

Copy and paste Glitter Doodle 3 as a new layer below your merged layer.
Position near the upper right side of the frame.
Duplicate. Mirror. Flip.
Position near the bottom left corner of the frame.

Copy and paste your tube as a new layer above the merged layer.

Add your embellishments. I used:
Summer (the sun): Resize 60%
Flip Flops: Resize 60%. Copy and paste only one at a time. Put in a position you choose.
Sunglasses: Resize 60%
Summer Hat: Resize 60%
Sparkles 1

Add your copyrights.

Add your name. I gave mine an inner bevel:
Bevel: 2
Width: 7
Smoothness: 55
Depth: 16
Ambience: -27
Shininess: 45
Color: white
Angle: 135
Intensity: 31
Elevation: 88
OK

Crop your image and resize all layers 85%.

I hope you enjoyed this tutorial.
I’d love to see your results.
Email me!
Hugs,Bev
 

Tiny Dancer

Clicking on the image will enlarge to full view.

Supplies
1 (or 2) tube of choice - I’m using the artwork of Gennadiy Koufay which you can purchase here
Font of Choice - I’m using Auqarelle here
Weescotlass Mask 249 here
Sparkles supplied here
Animation Shop
“Tiny Dancer” a full size size scrap kit created by Victoria of Pink Princess Designs and can be purchased here. You can visit her blog here.Thank you Victoria for such a delicate and beautiful kit!!

This tutorial was written assuming you have working knowledge of PSP.
~♥~ Let’s get started ~♥~

Open up a 700 X 700 blank canvas. Flood fill white.

Copy and paste Book as a new layer. Resize 25% & 90%

Copy and paste Lace 1 as a new layer. Resize 10%. Move the lace so that it lines up with the left edge of book at the bottom. Duplicate and move that layer so that the lace is all the way across the bottom of the book. Use either your Selection Tool set on Rectangle or your Eraser tool and get rid of the lace overhang - you want it to only be the length of the book.
Duplicate and flip.
Highlight the merged lace again. Duplicate. Free Rotate Right 99 degrees. Image Mirror.Move all 4 pieces of lace so that it outlines the book. Merge visible these 4 layers and move beneath the book in your layers pallet.

Using your Selection Tool set on Rounded Rectangle, outline the left page of the book.


Copy and paste a paper of choice. Resize 15% and 60%.
Selections/Invert. Hit the delete key.

Copy and paste your tube of choice - resizing as necessary.
Hit the delete key.
Selections/Modify/Feather
Number of Pixels: 30
Highlight the paper layer.
Tap the delete key until you’ve got the feathered look you desire.
Highlight your tube layer.
Tap the delete key until you’ve got the feathered look you desire.
Merge visible the paper and tube layer.
Free rotate right 4 degrees.

Repeat the above steps if you want a different tube on the opposite page. If you want the same tube then simply duplicate the merged layer/mirror.

Add your embellishments. I used:
Netting: Resize 25%
Flower Stem 2: Resize 15%
Button 2: Resize 60%. Mirror/Free rotate left 15 degrees
Flowers 1 & 2: Resize 15% and 40%
Slippers: Resize 15% & 70%
Ribbon 1: Resize 15%. Free Rotate Left 9 degrees
Feather: Resize 25%. Duplicate and resize 80% twice
Butterflies 1 & 2: Resizxe 15% and 70%
Leaves: Resizes 25%
Butterfly Trail: Resize 25% and 90%
Glow Sparkle: Resize 15%
Highlight your white canvas. New Raster Layer. Select All.Copy and paste a paper of choice Into Selection. Deselect.Apply the mask. Merge Group.

Use your Pick Tool and push in the top and bottom and pull out on the sides until you have the desired look.

Add your copyrights.

Add your name. I gave mine an inner bevel:
Bevel: 2
Width: 7
Smoothness: 55
Depth: 16
Ambience: -27
Shininess: 45
Color: whiteAngle: 135
Intensity: 31
Elevation: 88
OK
Crop your image and resize all layers 85%.

Time to Animate:
Copy Merge your tag. Carry into Animation Shop.

Edit/Paste as New Animation.
Ctrl + hit the L key until you have a total of 21 frames.
Ctrl + A to highlight all frames.

Open up the sparkles supplied.Ctrl + A
Edit/Copy

Highlight your tag.
Ctrl + E
Place the sparkles down the center of the book over the heart sparkle.

Highlight the first frame only.
Animation/Frame Properties
Change the Display Time to 300

View your animation.

If you’re happy then save. :O)

I hope you enjoyed this tutorial.
I’d love to see your results.
Email me!
Hugs,
Bev

Wednesday, May 20, 2009

Playing in the Sand

Clicking on the image will enlarge to full view.

Supplies
1 tube of choice - I’m using the artwork of PinUpToons which you can purchase here
Font of Choice - I’m using Sunset here
Mask 20/20 & Anima Frames here
Please do not share the animation without my permission.
Animation Shop
“Just Add Water” a PTU tagger size scrap kit created by Cindy of Southern Scrapz and can be purchased here. You can visit her blog here.
Thank you Cindy for such a fab kit!!

This tutorial was written assuming you have working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 X 700 blank canvas. Flood fill white.

Copy and paste Paper 4 as a new layer.

Copy and paste Ele 48 (sand) as a new layer. Position near the bottom right corner. Duplicate/Mirror and move so that the two blend together. Merge down. Duplicate and move this layer up so that it’s a little past the half way mark of your canvas. Merge visible the sand layers and the paper layer. Apply the mask. Merge Group.

Copy and paste Ele 68 (chain frame) as a new layer. Resize 40%.

Use your Magic Wand and click inside the frame.
Selections/Modify/Expand by 4.
Copy and paste the same Paper 4 again as a new layer.
Selections/Invert. Hit the delete button. Rename Paper Background.
Selections/Invert
New Raster Layer.
Effects/3D Effects/Cutout
Horizontal & Vertical: 10
Opacity & Blur: 25
Color: Black
OK

New Raster Layer. Repeat the above step accept change the horizontal and vertical numbers to -10.

Copy and paste Ele 65 (fish) as a new layer.
Resize 40%. Mirror.

Copy and paste Ele66 as a new layer.
Resize 30%. Mirror.

Copy and paste Ele67 as a new layer.
Resize 25% and 90%.

Copy and paste Ele63 as a new layer. Resize 80%. Position behind the paper of the frame on the right side so that the fronds stick out a little from the side and top. Duplicate/Mirror.

Paste Ele63 again, this time in front of the chain frame. Resize 60%. Position to one side of the chain frame. Duplicate/Mirror.

Copy and paste Ele64 (lighthouse) as a new layer. Resize 50%. Position behind the fronds that are behind the frame.

Copy and paste Ele53 (sun) as a new layer. Resize 50%. Move into position.

Copy and paste Ele17 (popsicle stick) as a new layer. Free rotate left 90 degrees. Resize 40%. Move into position. Duplicate and move the copy behind the fronds. Use your eraser tool on the copy and erase parts of the popsicle stick so that it looks like a few fronds are in front of it.

Copy and paste Ele43 (shell) as a new layer. Resize 30%.

Copy and paste Ele46 (starfish) as a new layer. Resize 30%.

Copy and paste your tube as a new layer.

Copy and paste Ele49 (sand) as a new layer. Position where you like, duplicating and resizing as you like as well.

Add your copyrights.

Add your name.
I gave mine a slight inner bevel:
Bevel: 2
Width: 3
Smoothness: 35
Depth: 2
Ambience: -8
Shininess: 10
Color: white
Angle: 315
Intensity: 75
Elevation: 20
OK

RESIZE ALL LAYERS 85%.

Time to Animate:
Open the animation I supplied in Animation Shop.
View/Normal Viewing.
Ctrl + A to highlight all the frames.

Go back into PSP. Close out all your layers.
Starting with your white canvas, open that one up and work your way up your layers, opening them all up until you reach the Paper Background layer and stop there. DO NOT OPEN UP THE PAPER BACKGROUND.
Copy Merge.

Carry into AS. Ctrl + L until you have 7 frames.
Ctrl + A.

Go back into PSP and open up the Paper Background layer. Study it and remember as closely as possibly where it is on the canvas.

Go back into AS. Highlight the Animated water I supplied. Ctrl + A. Copy.

Highlight the frames you just created from your canvas. Be sure all the frames are highlighted. Ctrl + E. Position the animated water where you recall it being.

Go back into PSP. Close out all the layers again. Starting with the frame JUST ABOVE the Paper Background layer, open them all up. Copy Merge. Carry into AS.

Be sure the working canvas is active and all frames are highlighted. Click on the Propagate Paste icon at the top of the screen (it looks like folders with the top right corners bent down). Position the rest of your tag over the animated water.

Again, making sure all the frames are highlighted -
Animation/Frame Properties
Change the number to 25

View your animation. If you’re happy then save.

I hope you enjoyed this tutorial.
I’d love to see your results.
Email me!
Hugs,
Bev

Sugar & Spice is Everything Nice

Clicking on the image will enlarge to full view.

Supplies
4 tubes of choice - I’m using the artwork of PinUpToons which you can purchase here
Font of Choice - I’m using Al Sandra here
Designs by Ali Template 51 here
Toadies - Ommadawn
EyeCandy 5 - Impact - Gradient Glow (optional)
“Sweet as Sugar” a PTU tagger size scrap kit created by Nikki of Creative Intentionz and can be purchased here. You can visit her blog here.
Thank you Nikki for such a fun kit!!

This tutorial was written assuming you have working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up the template. Shift + D. Close out the original. Delete the DBA layer. New Raster Layer. Flood fill white. Send to bottom and highlight it in your layers pallet.
Image/Canvas size
Width: 700
Height: 700
Set on Pixels
OK
Flood fill white

Highlight Circle Back layer.
Select All/Float/Defloat
Copy and paste a paper of choice as a new layer.
Selections/Invert.
Hit the delete key.
Delete the template layer.

Highlight Circle Frame layer. Repeat the above step.
Use your Magic Wand and click inside the frame.
Selections/Modify/Expand by 4.
New Raster Layer beneath the frame.
Effects/3D Effects/Cutout
Vertical & Horizontal: 10
Opacity & Blur: 25
Color: Black
OK

Drop Shadow the Circle Frame layer.

Highlight Rectangle Back layer.
Select All/Float/Defloat
Copy and paste a paper of choice as a new layer.
Selections/Invert.
Hit the delete key.
Delete the template layer.

Highlight Rectangle Frame layer. Repeat the above step.
Use your Magic Wand and click inside the frame.
Selections/Modify/Expand by 4.
New Raster Layer beneath the frame.
Effects/3D Effects/Cutout
Vertical & Horizontal: 10
Opacity & Blur: 25
Color: Black
OK
Repeat the Cutout effect accept change the Veritcal and Horizontal to -10.

Drop Shadow the Rectangle Frame layer.

Use your Magic Wand and click inside Rectangle Frame layer.
Selections/Modify/Expand by 4.
Copy and paste a tube of choice below the frame.
Hit the delete key.
(Just to jazz only this frame up a bit, I duplicated my tube, enlarged the original, moved it slightly to the left and decreased the opacity. On the copy I moved it slightly to the right a bit)

All the steps you just did to complete the rectangle frame - repeat with all the heart layers.

Copy and paste Button 1 as a new layer. Resize 30% and move into position over one of the Small Circles layer (we’re only using the Small Circles and Small Circle Frames as a guide).

Repeat the above step with Buttons 2,,3, and 4. Once you have all the buttons in place delete Small Circle and Small Circle Frame layers.

Add your embellishments. I used:
Sunflower 4: Duplicate 3 times and position the sunflowers behind the large circle.
Ribbon 1: Resize 38%. Free rotate Left 30 degrees
Ribbon Flower 1: Resize 38%. Free rotate Left 30 degrees
Dazzling Bow 1: Resize 25% and 90% Free rotate right 30 degrees
Butterfly 2: Mirror. Resize 50%
Handbag 1: Resize 60%
Sunglasses 4: Resize 30%

Close out your white background. Merge visible. Duplicate. Re-open your white background and highlight the merged layer.
Adjust/Blur/Gaussian Blur
Radius: 20
OK

Toadies/Ommadawn
Use Default settings

Add your copyrights.

Add your name.
I used papers from the kit for my foreground and background colors.
Then used Eyecandy 5 Impact and added a Gradient Glow with these settings:
Basic Tab:
Outside Glow checked
Mask Selection checked
Glow Radius: 30
Soft Corners: 0
Overall Opacity: 100
Distortion Amount: 0
Distortion Lump Size: 100
Gradient Smoothness: 97
Opacity color: Black
 
Crop your image and resize all layers 85% if you like before saving your tag.

I hope you enjoyed this tutorial.
I’d love to see your results.
Email me!
Hugs,
Bev

Tuesday, May 19, 2009

Envious Love


Clicking on the image will enlarge to full view.
Supplies

1 tube of choice - I’m using the artwork of Elias Chatzoudis which you can purchase here
Font of Choice - I’m using Galleria-Normal here
“Love Always” a FTU tagger size scrap kit, also available in full size created by RebelChick’s Scraps and can be found here.
Please leave a thank you when downloading. It’s a small gesture for hard work given freely.
This tutorial was written assuming you have working knowledge of PSP.
~♥~ Let’s get started ~♥~

Open up a 700 X 700 blank canvas. Flood fill white.

Copy and paste Frame 1 as a new layer.

Use your Magic Wand and click inside the frame. Selections/Modify/Expand by 6. Copy and paste a paper of choice below the frame. Selections/Invert. Tap the delete key.

Copy and paste your tube below the frame. Tap the delete key. Deselect. Close out your white canvas and merge visible. Re-open your white canvas.

Copy and paste Flower 2 as a new layer. Position near the top left of the heart and move behind the heart in the layers pallet. Duplicate/Mirror.

Copy and paste Flower 3 as a new layer and position near the bottom part of the heart. Move behnd the heart in the layers pallet.

Copy and paste DoubleHeart 2 as a new layer. Use your Magic Wand and click inside of each heart. Selections/Modify/Expand by 3. Copy and paste a paper of choice below the double heart. Hit the delete key. Deselect. Merge Visible the double hearts and paper. Move into position at the left side of the heart.

Copy and paste Flower 7 as a new layer. Resize 45%. Copy and paste Flower 8 as a new layer. Resize 35%. Give it a drop shadow. Center it over Flower 7. Merge Visible Flowers 7 & 8. Move into position at the right side of the heart. Duplicate and move down. See my tag for reference.

Copy and paste Dragonfly 1 as a new layer. Resize 40%. Free rotate left 25 degrees. Move into position near the top right of the heart.

Add your copyrights.

Add your name.

Crop your image.

I hope you enjoyed this tutorial.
I’d love to see your results.
Email me!
Hugs,
Bev

Heaven has been Waiting


Clicking on the image will enlarge to full view.

Supplies
1 tube of choice - I’m using the artwork of Gennadiy Kouffay which you can purchase here
Font of Choice - I’m using Papyrus here
Becky Mask 22 here
“A Little Bit of Heaven” a PTU tagger size scrap kit created by Designs by Denise and can be purchased here.
Thank you Denise for such a beautiful kit!

This tutorial was written assuming you have working knowledge of PSP.
~♥~ Let’s get started ~♥~

Open up a 700 X 700 blank canvas. Flood fill white.

Copy and paste Frame 1 as a new layer. Resize 80%.

Use your Magic Wand and click inside the frame. Selections/Modify/Expand by 6. Copy and paste a paper of choice below the frame. Selections/Invert. Tap the delete key.

Copy and paste your tube below the frame. Tap the delete key. Deselect. Close out your white canvas and merge visible. Re-open your white canvas
.
Add your embellishments. I used:
Daisy 5
Daisy 3: Resize 50%
Daisy 2: Resize 50%
Duplicate Daisy 3: Resize 70%
Duplicate Daisy 2: Resize 50%
Butterfly 1 & 3: Resize 40%
Double Hearts: Resize 25%
Star 5: Resize 25%
Envelope: Resize 50%. Free Rotate right 20 degrees

Highlight your white canvas. New Raster Layer. Select All. Copy and paste a dark paper of choice Into Selection. Deselect. Apply the mask. Merge Group. Use your deformation tool and bring the top and bottom in just a little bit.

New Raster Layer. Select All. Copy and paste a light paper of choice Into Selection. Deselect. Apply the mask. Merge Group. Using your deformation tool again, bring the top and bottom in to match up with your other mask.

Add your copyrights.

Add your name.
Crop your image and resize all layers 85%.

I hope you enjoyed this tutorial.

I’d love to see your results.
Email me!
Hugs,
Bev

Magical Moments

Clicking on the image will enlarge to full view.

Supplies

1 tube of choice - I’m using the artwork of Zindy S.D Nielsen which you can purchased here
Font of Choice - I’m using Balsam here
Weescotlass Mask 249 here
Twinks which I’ll supply here
Animation Shop
"Magical Moments" a PTU scrap kit by Tina of Tina's Magical Scrap World and can be purchased here. You can view here blog here.
Tina, wow, wow, WOW! You've made yet another stunning kit!
Thank you so much.

This tutorial was written assuming you have working knowledge of PSP.
~♥~ Let’s get started ~♥~

Open up a 700 X 700 blank canvas. Flood fill white.

Copy and paste Frame 1 as a new layer. Resize 75%.

Use your Magic Wand and click inside the frame. Selections/Modify/Expand by 6. Copy and paste a paper of choice below the frame. Selections/Invert. Tap the delete key.

Copy and paste your tube below the frame. Tap the delete key. Deselect. Close out your white canvas and merge visible. Re-open your white canvas.

Add your embellishments. I used:
Fan 1
Bling Butterfly 1: Free Rotate right 25 degrees
Spring Flower 3: Resize 35%
Spring Flower 2: Resize 30%
Spring Flower 1: Resize 25%
Tag 1: Resize 80%
Magic Flower 2: Erase bottom part of stem
Brad Star 1: Resize 40%
Brad Star 2: Resize 30%
Butterfly 3: Resize 25% - Free Rotate right 20 degrees
Butterfly 2: Mirror, Resize 25% and 80% - Free Rotate left 20 degrees

Highlight your white canvas. New Raster Layer. Select All. Copy and paste a paper of choice Into Selection. Deselect. Apply the mask. Merge Group.

Add your copyrights.

Add your name.

Onto the Animation:
Open up the twinks in Animation Shop.
Ctrl + A (to highlight all frames)

Back into PSP, Copy Merge and carry into Animation Shop.
Edit/Paste/As New Animation.
Ctrl + tap the L key to duplicate until you have 16 frames.

Highlight the twinks frames.
Edit/Copy
Highlight the duplicated tag frames.
Ctrl + A
Click on the Propogate Patse icon:
(It’s at the top and looks like 3 folders with the top right corners folded down)
Ctrl + E
Place the twinks at various spots on your tag.

View your animation. If your happy with it then save.

I hope you enjoyed this tutorial.

I’d love to see your results.
Email me!
Hugs,
Bev

Sunday, May 17, 2009

Made to be Broken


Clicking on the image will enlarge to full view
and be able to see the animation

Supplies

1 tube of choice - I’m using the artwork of Nicole Brune which you can purchased here
Font of Choice - I’m using Rodeo Regular here
Weescotlass Mask 5 here
DSB Flux - Bright Noise
Toadies - What Are You?

This tutorial was written assuming you have working knowledge of PSP.
~♥~ Let’s get started ~♥~

Open up a 700 X 700 blank canvas. Flood fill white.

We’ll set the color up for the star shape. Close out the foreground and make the background a dark color that’s complimentary to your tube.
I used #624024.

Choose Symmetric Shape and click on the star. Draw out a star to cover about 70% of your canvas.
Objects/Align/Center in Canvas
Convert to Raster layer. Name this layer STAR.

Select All/Float/Defloat
Selections/Modify/Contract by 4.
New Raster Layer.
Create a gradient using lighter colors from your tube and flood fill. Gradient settings:
Style: Sunburst
Angle: 0
Repeats: 2
Deselect.
Duplicate 2 times for a total of 3 gradient filled stars. Rename them G Star 1, G Star 2, and G Star 3.
Highlight G Star 1 and apply the DSB Flux/Bright Noise:
Intensity: 31
Mix
OK

Highlight G Star 2. Apply Bright Noise again accept hit the mix button twice. Repeat the G Star 2 accept hit the Mix button 3 times. Close out G Star 2 & 3.

Highlight STAR. Duplicate. Highlight the original STAR.
Apply Toadies - What Are You?
X dose: 20
Y-dose: 20
OK

Highlight your white canvas. New Rater layer. Flood fill with a gradient using he same colors accept change to:
Style: Linear
Angle: 45
Repeats: 2
Flood fill.
Apply the mask. Merge Group.

Copy and paste your tube in front of the star.

In your color pallete, close out the background. Change the foreground to a dark color - width: 2
Make a circle large enough to encircle the star.
Objects/Align/Center in Canvas.
If you find that you don’t have room for writing DON’T PANIC!!
Just resize all your layers 90% or however much smaller you need to :O)

Click on your Text Tool. Move your mouse near the top center of the circle until you see the A with a rocking chair bottom to it. Click your mouse. Write out the words RULES WERE MADE TO BE BROKEN….or whatever saying you want. Click Apply.
In your layer pallet click the tiny box with the + sign in it. In the layer that says NEW ELLIPSE, click on the eye to close it out. On the layer with the writing right click, then click on Properties. You can change the coloring of your writing here. OK
Right Click on Vector 1 Layer/Convert to Raster Layer.

Add your copyrights.

Add your name.

Onto the Animation:
Be sure that you have G Star 2 & 3 closed out.
Copy Merge and carry into Animation Shop.
Edit/Paste/As New Animation.

Back into PSP close out G Star 1 and open up G Star 2.
Copy Merge. Carry into AS.
Edit/Paste/After Current Frame.

Back into PSP close out G Star 2 and open up G Star 3.
Copy Merge. Carry into AS.
Edit/Paste/After Current Frame.

View your animation. If your happy with it then save.

I hope you enjoyed this tutorial.

I’d love to see your results.
Email me!
Hugs,
Bev

Precious Memories

Clicking on the image will enlarge to full view.

Supplies
1 tube of choice - I’m using the artwork of Barbara Jensen which you can purchase here
Font of Choice - I’m using Aquarelle here
Becky Mask 22 here
“Memories” a FTU scrap scrap kit available in both tagger and full size by RebelChick’s Scraps and can be found here.
Please leave a Thank You when downloading. It's a small gesture for hard work given freely.
Thank you RebelChick for such a stunning kit!

This tutorial was written assuming you have working knowledge of PSP.


~♥~ Let’s get started ~♥~

Open up a 700 X 700 blank canvas.
Flood fill white.

Copy and paste Journal 1 as a new layer.
Resize 70%.

Using your selection tool set on Rounded Rectangle, outline the inner area of the journal.



Copy and paste a paper of choice as a new layer. Selections/Invert. Hit the delete key.

Copy and paste your tube of choice as a new layer, centering it over the paper. Hit the delete key.

Highlight the paper layer.
Selections/Modify/Feather
Number of Pixels: 53
Tap the delete key until you have the desired feathered effect of the paper.

Highlight your tube layer. Again, tap the delete key until you have the desired feathered effect. Deselect.

Closeout the white canvas and merge visible. Free rotate Left 15 degrees. Open the white canvas back up.

Add your elements. I used:
Lace 2
Light
Feathered Pen 1: Resize 50%
Heart Lock: Resize 35%. Free rotate left 20 degrees
Key: Resize 50%. Free rotate right 65 degrees
Fluffy Bow 1: Resize 25%
Callalilly 3: Resize 70%
Rose 9: Resize 30%
Leaf 4: Resize 30%
Leaf 1: Resize 30%, flip
Ribbon Pin 2: Resize 65%, Free Rotate right 30 degrees
Copy and paste the watch. Copy and paste the clock, resize 85% and position on the right side of the watch. Merge down. Reisze 50%. Free rotate right 15 degrees.

Highlight the white canvas. New raster layer. Copy and paste a paper of choice Into Selection. Deselect. Apply the mask. Merge Group.

Add your copyrights.

Add your name.

I hope you enjoyed this tutorial.
I’d love to see your results.
Email me!
Hugs,
Bev