Saturday, September 19, 2009

Be Aware

Clicking on the image will enlarge for bigger view

Supplies
1 tube of choice - I’m using the artwork of Irene Shpak which you can purchase here.
Font of Choice - I’m using Daly Hand here.
Scrapity Scrap and More Template #1 here.
“Hope” is a PTU tagger size scrap kit created by Lynne of Baby Cakes Scraps and can be purchased at Creative Scrap Store. You can visit her blog here.
Thank you Lynne for such a beautiful and delicate kit!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up the template.
Shift + D.
Close out the original.
Resize all layers 110%
Delete Raster 8.
Image/Canvas Size
600 X 500
Highlight Raster 1 and flood fill white.

Highlight Raster 2
Select All/Float/Defloat
Copy and paste a paper of choice Into Selection.
Deselect.
Delete template layer.

Repeat the above step with all remaining layers.

Copy and paste your tube inside the Heart Frame.

Copy and paste Frame 2 as a new layer.
Resize 30%
Duplicate twice and arrange them behind the heart.
See my tag for reference.

Add your embellishments. I used:
Awareness Ribbon: Resize 25% and 80%
Butterfly: Resize 25% and 50% Free rotate right 25 degrees.
Pink Daisy: Resize 25%. Duplicate/Resize 80%
Corner: Resize 30% Free rotate left 25 degrees
Butterfly 2: Resize 50% Free rotate left 25 degrees
Small Butterfly: Resize 30%
Daisy Petals: Resize 25%. Free rotate left 90 degrees

Add your copyrights.

Add your name.
I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my Show Arena.
Email me!
Hugs,
Bev

Essence of Beauty

Clicking on the image will enlarge for bigger view.

Supplies
1 tube of choice - I’m using the artwork of Elias Chatzoudis which you can purchase here.
Font of Choice - I’m using MA Sexy here.
Blissfully Beth’s Template 60 here.
“Essence of Beauty” is a PTU tagger size scrap kit created by Missy Lynn of Missy Lynn Scraps and can be purchased at Exquisite Scraps here. You can visit her blog here.
Thank you Missy Lynn. I just adore this kit!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up the template.
Shift + D.
Close out the original.
Delete the following layers:
Blissfullybeth
Circle 1
Circle 2

Highlight Stripe 1 layer.
Merge down.
Merge down again.
All 3 stripes should be on the same layer.
Select All/Float/Defloat
New Raster Layer.
Copy and paste a paper Into Selection.
Deselect.
Delete template layer.

Highlight Frame 1 layer.
Select All/Float/Defloat
New Rater layer.
Copy and paste a paper of choice into selection.
Selection/Modify/Contract by 20
Copy and paste a paper of choice as a new layer.
Selections/Invert
Tap the delete key.
Selections/Invert
Selections/Modify/Contract by 8
Tap the delete key.
Selections/Modify/Expand by 1

New Raster layer below the “frame” you just created.
Flood fill with a gradient of your choice.

Copy and paste your tube below the frame.
Tap the delete key.
Deselect.
Delete the template layer.

Now Merge visible Raster layers 2, 3, 4, and 5.
Duplicate/Mirror.
Delete Frame 2 template.

Add your embellishments. I used:
Flower 2: Resize 60%
Flower 3: Resize 50% Free rotate right 45 degrees
Butterfly 2: Resize 40%
Doodle 3: Resize 70%
Leaf 1: Resize 50%
Charm 1: Resize 50%

Add your copyrights.

Add your name.
I gave mine a slight inner bevel:


I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my Show Arena.
Email me!
Hugs,
Bev

Untamed Beauty

Clicking on the image will enlarge for bigger view.

Supplies
4 tubes of choice - I’m using the artwork of Jay Trembly which you can purchase here
Font of Choice - I’m using Xaphan here
Weescotlass Mask 241 here
“Yard Sale” is a PTU full size scrap kit created by Kat of KatNKDA and can be downloaded from her store NK Art Shop.
You can visit Kat’s blog here.
Kat, thank you so much for another beautiful kit.

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a transparent 700 X 700 image.
Flood fill white.

Copy and paste Element 37 as a new layer.
Resize 70%
Using your Freehand Selection Tool, outline the top left paper in the element.



Copy and paste a paper of choice as a new layer.
Resize 25% and 40%
Selections/Invert
Tap the delete key.

Copy and paste your tube as a new layer.
Resize to your liking.
Tap the delete key.

Merge Down
Your tube and paper should be on one layer now.
Selections/Modify/Feather
Number of pixels: 53
OK
Tap the delete key until you have the desired feathered effect.
Deselect.

Repeat the above steps with the remaining papers.
Once you’ve done that, close out your white canvas and merge visible.
Reopen your white canvas.

Add your embellishments. I used:
Element 15: Resize 80% Free rotate left 10 degrees
Element 16: Resize 60% Free rotate right 10 degrees
Element 30: Resize 25%
Element 25: Resize 25% and 70%
Element 10: Resize 25% and 50%
Element 14: Resize 50%

Highlight your white background.
New Raster layer.
Copy and paste a paper of choice Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name.

Resize all layers 85%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my Show Arena.
Email me!
Hugs,
Bev

Thursday, September 17, 2009

Autumn Bliss



Clicking on the image will enlarge for bigger view.

Supplies
1 tube of choice - I’m using the artwork of Tom Fleming which you can purchase here.
Font of Choice - I’m using Dragonfly here.
Country Bug’s Template - “My Way is the Bad Way” - here.
“Autumn‘s Splendour” is a PTU tagger size scrap kit created by Julie of Bits ’n Bobs and can be purchased at AMI. You can visit her blog here.
Thank you Julie. I just adore this kit!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up the template.
Shift + D.
Close out the original.
Resize all layers 110%
Delete the following layers:
Raster 2
My way is outline
My way is
The bad way outline
The bad way.

Highlight the Frayed layer.
Select All/Float/Defloat
New Raster Layer.
Copy and paste a paper Into Selection.
Deselect.
Delete template layer.

To make this easier and less complicated than it has to be, close out all layers. We’ll only open the layers that we’ll be working with.

Open up your white canvas, Gray Back, and Gray Frame.
Highlight Gray Back.
Select All/Float/Defloat
Copy and paste a paper of choice as a new layer.
Resize 65%.
Selections/Invert
Tap the delete key.
Deselect.
Delete the template layer.

Highlight the Gray Frame layer.
Select All/Float/Defloat
New Raster Layer.
Copy and Paste a paper of choice Into Selection.
Deselect.
Delete the template layer.
Give the frame a slight inner bevel:




Close out your white background.
Merge Visible.

Now close out that merged layer and rename it Main Frame.

Repeat the above steps with the remaining two Gray backs and frames.

Bring the Main Frame layer to the top of the other 2 merged layers.

After you’ve done that Merge Visible the following layers.
Small Gray, Small Gray 2, 3, and 4.
Select All/Float/Defloat
New Raster layer.
Copy and paste a paper of choice Into Selection.
Deselect.
Delete the template layer.

Close out all layers and merge visible the frames that goes to the squares.
New Raster layer.
Copy and paste a paper of choice Into Selection.
Deselect.
Delete the template layer.

Copy and paste your tube as a new layer.

Add your embellishments. I used:
Element 19: Resize 70%
Vine 1
Butterfly 2 & 3: Resize 20%, 80% and 80% again.
Free rotate 20 degrees.
Use various elements in Element 1.

Add your copyrights.

Add your name.
Give it a slight inner bevel as before accept change the bevel to #2.
Apply some Noise to your liking.

Resize all layers 95%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my Show Arena.
Email me!
Hugs,
Bev
 

Snapshots of the Past


Supplies
1 image of choice - I’m using the artwork of Olivia which you can purchase here.
Font of Choice - Papyrus here
Insatiable Dreams Mask 164 in Group 6 here
“Snapshots of the Past” is a PTU tagger size scrap kit created by Krissy of Crimson Butterfly Scrapz and can be purchased at Dazzling Scraps. You can visit her blog here.
Thank you Krissy for a fabulous kit!
This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 X 700 transparent image.
Flood fill white.

Copy and paste Frame 1 as a new layer.
Use your Magic Wand and click inside the frame and all the spaces as well.
Selections/Modify/Expand by 8
Copy and paste your image as a new layer below the frame.
Selections/Invert
Tap the delete key.
Deselect.

Add your embellishments. I used:
Flower
Doodle
Rose: Resize 50%
Rose 2: Free rotate right 80 degrees. Duplicate/Resize 80%
Set of keys: Resize 80%. Free rotate right 15 degrees
Butterfly: Resize 50%

Crop our image.

Highlight your white background.
New Raster Layer.
Copy and paste paper of choice Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name.
Give it a slight inner bevel:


Resize all layers 95%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my Show Arena.
Email me!
Hugs,
Bev
 
 
 
 
 

Wednesday, September 16, 2009

Hope, Inspire, Believe

Clicking on the image will enlarge for bigger view.

Supplies
Font of Choice - I’m using Fabuouos 50’s Normal here
Creative Desires Mask 31 here - If you know who this mask belongs to can you please email me so that I can give proper credit. Thank you.
Blissfully Beth Template 63 here
“Autumn Splendour” is a PTU tagger size scrap kit created by Julie of Bits ’n Bobs and can be purchased at AMI. You can visit her blog here.
Thank you Julie for such an amazing and festive kit!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up the template.
Shift + D.
Close out the original.
Delete the credit (Blissfully Beth)layer.

Normally I do the mask last, but I fell in love with the papers in this kit and just had to do it first.
New Raster layer above the background layer.
Select All
Copy and paste a paper of choice Into Selection.
Deselect.
Apply the mask.
Merge Group.

Highlight the Black Circle layer.
Select All/Float/Defloat
New Raster layer.
Copy and paste a paper of choice Into Selection.
Deselect.
Apply a slight inner bevel:


Delete the template layer.

Repeat the above step with the Gray Circle layer.

Merge Visible Tab Layers 1 2, 3, and 4.
All should be on the same layer.
Select All/Float/Defloat
Copy and paste a paper of choice as a new layer.
Selections/Invert
Tap the delete key.
Delete the template layer.

Highlight the White Frame layer.
Select All/Float/Defloat
New Raster layer.
Copy and paste a paper of choice Into Selection.
Selections/Modify/Contract by 10
Tap the delete key.
Selections/Modify/Expand by 2
New Raster layer below the “frame” you just created.
Copy and paste a paper of choice Into Selection.
Deselect.
Highlight the frame layer and give the same inner bevel.

Highlight the Word Art layer.
Select All/Float/Defloat
Create a new image and flood fill it with a color of your choice.
Copy and paste as a new layer on your working image.
Selections/Modify/Contract by 1
Tap the delete key.
Deselect.
Merge Down.
Give it the same inner bevel.
Adjust/Add Remove Noise/Add Noise:



Add your embellishments. I used:
Butterfly 1: Resize 20% Free rotate right 20 Degrees
Butterfly 3: Resize 15% Free rotate left 20 degrees
Vine 1: Resize 50%. Free rotate left 90 degrees
Element 2: I used my Freehand Selection Tool and copied different things onto my canvas.
Element 4: Resize 80%

Add your copyrights.

Add your name.
Type your name out in black.
Select All/Float/Defloat
Copy and paste the same color you used for the Word Art layer.
Selections/Modify/Contract by 2
Tap the delete key.
Deselect.
Merge down.
Give it the same inner bevel.
Apply the same Noise effect.

Resize all layers 90%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my Show Arena.
Email me!
Hugs,
Bev

Tuesday, September 15, 2009

Captive Hearts

Clicking on the image will enlarge for bigger view.

Supplies
1 tube of choice - I’m using the artwork of Zindy S.D. Nielsen which you can purchase here.
Font of Choice - I’m using Aquarelle here
Weescotlass Mask 62 here
“Opposites Attract” is a PTU tagger size scrap kit created by Julie of Bits ’n Bobs and can be purchased at AMI. You can visit her blog here.
Thank you Julie for a stunning and classy kit!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 X 700 transparent image.
Flood fill white.

Copy and paste Frame 1 as a new layer.
Free rotate left 90 degrees.
Using your Freehand Selection Tool, outline the square of the frame.
New Raster layer below the frame.
Flood fill with a gradient of your choice.
Copy and paste your tube above the gradient layer.
Selections/Invert
Tap the delete key.
Selections/Modify/Feather
Number of Pixels: 53
Tap the delete key until you get a slight feathered effect.
Deselect.

Add your embellishments. I used:
Ladder 1: Free rotate right 15 degrees
Branch 1 & 2
Bow 1: Resize 40%
Image/Flip
Free rotate right 47 degrees
Sparkle 1: Resize 50%
Little Flowers 1: Resize 70%

Highlight your white background.
New Raster Layer.
Copy and paste paper of choice Into Selection.
Deselect.
Apply the mask.
Merge Group.

Crop your image making sure you don’t crop any of the mask.

Type out the words “Captive Hearts”
Position at the top of your tag.

Add your copyrights.

Add your name.

Resize all layers 90%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my Show Arena.
Email me!
Hugs,
Bev

Monday, September 14, 2009

Crazy For You

Clicking on the image will enlarge for bigger view.

Supplies
4 tubes of choice - I’m using the artwork of Keith Garvey which you can purchase here.
Font of Choice - I’m using Velvenda Cooler here and Alsandra here
Scrap Dimensions Mask 6 here
Blissfully Beth Template 29 here
“Diva-licious” is a PTU tagger size scrap kit created by Julie of Bits ’n Bobs and can be purchased at Exquisite Scraps.
You can visit her blog here.
Thank you Julie for a terrific kit!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up the template.
Shift + D.
Close out the original.
Delete Raster 1.

Highlight the Gray Bars bg Layer.
Select All/Float/Defloat
New Raster layer.
Copy and paste a paper of choice Into Selection.
Deselect.
Delete the template layer.
Highlight Rec 3 layer.
Select All/Float/Defloat
New Raster layer.
Copy and paste a paper of choice Into Selection.
Selections/Modify/Contract by 7.
Tap the delete key.
Selections/Modify/Expand by 2.
Copy and paste a paper of choice below the “frame” you just created.
Resize the paper 50%
Move into position.
Selections/Invert
Tap the delete key.
Deselect.
Delete the template layer.
Give the “Frame” a slight inner bevel:


Merge visible the “frame” and paper back.

Repeat the above steps with Rec layers 1 and 2.

Highlight Heart 1 layer.
Select All/Float/Defloat
New Raster layer.
Copy and paste a paper of choice Into Selection.
Selections/Modify/Contract by 7.
Tap the delete key.
Selections/Modify/Expand by 2.
Copy and paste a paper of choice below the “heart frame” you just created.
Resize the paper 50%
Move into position.
Selections/Invert
Tap the delete key.
Copy and paste your tube below the heart frame.
Tap the delete key.
Deselect.
Delete the template layer.
Give the fame the same slight inner bevel:
Merge visible the heart frame, tube, and paper back.

Duplicate and move into position over the other heart.
Delete that template layer.

Highlight “I’m Crazy for You” layer.
Select All/Float/Defloat
Copy and paste a paper of choice as a new layer.
Selections/Invert
Tap the delete key.
Deselect.
Delete the template layer.
Give it the same slight inner bevel.

Add your embellishments. I used:
Buttons 2 & 3: Resize 15% and 90%
Vertical Wrap: Resize 35%. Use the Pick Tool to stretch as needed.
Fancy Feather 2: Resize 60%. Free rotate 45 degrees
Feather 2: Resize 40%. Free rotate right 110 degrees
Feather 1: Resize 30%. Free rotate right 110 degrees
Show 5: Resize 35%. Mirror/Duplicate. Free rotate left 90 degrees.

Copy and paste your tubes as new layers.

Highlight your white background.
New Raster Layer.
Copy and paste paper of choice Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name.
Color pallet: Both foreground and background set on pattern - choose papers from the kit.
Stroke set on 3
Type your name out using the Velvenda Cooler font.
Use your Pick Tool stretch it out a bit if it’s a small name.
Select All/Float/Defloat
Selections/Modify/Contract by3
Give it the same slight inner bevel.
Deselect.

Type your name out again using Al Sandra.
Again, use your pick tool to stretch the name out a bit.

Resize all layers 90%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my Show Arena.
Email me!
Hugs,
Bev

Raining Color

Clicking on the image will enlarge for bigger view.

Supplies
1 tube of choice - I’m using the artwork of Amy Mathews which you can purchase at AMI.
Font of Choice - I’m using Brush Tip Terrence here
Becky Mask 22 here
My Template 31 here
“Leafs are Falling” is a PTU tagger size scrap kit created by Rieneke Designs and can be purchased as Scraps with Attitude.
You can visit her blog here.
Thank you Rieneke for a festive Autumn kit!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up my template.
Shift + D.
Close out the original.
Delete the credit, bow, and stitches layers.

Highlight the Large Rectangle Layer.
Select All/Float/Defloat
New Raster layer.
Copy and paste a paper of choice Into Selection.
Deselect.
Delete the template layer.
Give it a slight inner bevel:



Highlight the Small Rectangle layer.
Repeat the above step accept use a different paper.

Highlight Oval 2 layer.
Merge down.
Both should be on the same layer now.

Select All/Float/Defloat
New Raster layer.
Create a gradient and flood fill.
DO NOT DESELECT.

Copy and paste your tube of choice and position over one of the ovals.
Selection/Invert
Tap the delete key.
DO NOT DESELECT YET.

Highlight your tube Image.
Mirror.
Copy and paste onto your working canvas as a new layer.
Move into position over the other layer.
Tap the delete key.
DO NOT DESELECT YET.

New Raster layer.
Effect/3D Effects/Cutout


Repeat the above accept change the horizontal and vertical numbers to negative.
Deselect.

Merge visible your gradient and tube layers.
Apply a slight inner bevel:


Copy and paste Eyelet Ribbon 1 as a new layer.
Resize 35%.
Position at the bottom of the small Rectangle.
Duplicate/Mirror/Flip
Position at the top of the small Rectangle.
Close out your white background and merge visible.

Add your embellishments. I used:
Leafs 1: Resize 30%
Acorn: Resize 20%
Acorn 2: Resize 25%. Mirror
Glitter Pear 1: Resize 30%
Glitter Apple 2: Resize 30%. Mirror.
Wrap 1: Resize 30% Free rotate left 45 degrees - erase any that overhangs.
Leafs - copy and pasted in various spots on my tag.

Crop your image but be sure to leave some room at the top and bottom.

Highlight your white background.
New Raster Layer.
Copy and paste paper of choice Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my Show Arena.
Email me!
Hugs,
Bev

Memorable Treasures

Clicking on the image will enlarge for bigger view.

Supplies
1 tube of choice - I’m using the artwork of Jennifer Janesko which you can purchase here
Font of Choice - I’m using HandScript LCase here
Insatiable Dreams Mask 157 - You’ll find it in Mask 6 Group here
“Shabby Treasures” is a PTU full size scrap kit created by Kat of KatNKDA and can be downloaded from her store NK Art Shop.
You can visit Kat’s blog here.
Kat, what can I say? Your work and talent truly amazes me!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a transparent 700 X 700 image.
Flood fill white.

Copy and paste Element 21 as a new layer.
Resize 70%

Copy and paste Element 3 as a new layer.
Resize 25%
Click inside with your Magic Wand.
Selections/Modify/Expand by 6
New Raster Layer below the frame.
Copy and paste a paper of choice Into Selection.

Copy and paste your tube as a new layer below the frame.
Selections/Invert
Tap the delete key.
Deselect.

Close out your white canvas and Element 21.
Merge visible.
Reopen all your layers.

Add your embellishments. I used:
Element 2: Resize 25% and 50%
Element 14: Resize 25% and 90% Free rotate right 20 degrees
Element 13: Resize 20% Free rotate left 10 degrees
Element 24: Resize 40%
Element 10: Resize 25%

Highlight your white background.
New Raster layer.
Copy and paste a paper of choice Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name.

Resize all layers 85%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my Show Arena.
Email me!
Hugs,
Bev
 
 
 
 
 

Sunday, September 13, 2009

Flowers of Autumn

Clicking on the image will enlarge for bigger view.

Supplies
3 tubes of choice - I’m using the artwork of PinUpToons which you can purchase here
Font of Choice - I’m using Baby Kruffy here
Weescotlass Mask 219 here
My Template 35 here
Mura Meister - Copies
“Autumn’s Flame” is a PTU tagger size scrap kit created by Lynne of Baby Cakes Scraps and can be purchased at Exquisite Scraps.
Thank you Lynn for a most beautiful autumn kit!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up the template.
Shift + D.
Close out the original.
Delete the credit layer.
Highlight the background layer.
Image/Canvas Size
700 X 700
Close out the Flowers layer.

Highlight Circle layer.
Select All/Float/Defloat
New Raster Layer.
Copy and paste a paper of choice Into Selection.
Deselect.
Delete the template layer.
Give it a slight inner bevel:


Highlight Right Rectangle.
Merge down.
Merge down again.
All 3 rectangles should be on one layer now.
Use your Magic Wand and click on all three rectangles.
New Raster layer.
Copy and paste a paper of choice Into Selection.
Deselect.

Highlight the merged Rectangle template layer.
Use your Magic Wand and click inside the left rectangle.
Now highlight the paper rectangle layer.
Copy and paste your tube and position over the rectangle.
Selections/Invert
Tap the delete key.

Repeat the above step with the other remaining rectangles.
Once you’ve done that, delete the template layer.
Merge visible your tube layers and rectangles.
Give it the same inner bevel.

Copy and paste Daisy as a new layer.
Resize 50%
Apply Mura Meister Copies



Move below the circle layer.

Copy and paste Sequins as a new layer.
Resize 25%
Line up along the top of the middle rectangle.
Erase any that overhangs on the sides.
Duplicate/Flip
Position it at the bottom of the rectangle.
Paste the sequins again.
Resize again.
Free rotate left 90%
Line it up against the side of the rectangle.
Erase any that overhangs.
Duplicate/Mirror
Position it at the right side of the rectangle.
Merge visible all sequins layers.
Duplicate.
Free rotate left 10 degrees
Position over the left rectangle.
Duplciate/Mirror
Position over the right rectangle.

Copy and paste Wrap 2 as a new layer.
Resize 25%
Free rotate left 100 degrees.
Position at the left rectangle.
Duplicate/Mirror/Flip
Free rotate right 20 degrees.
Position at the right rectangle.

Copy and paste Heart tag as a new layer.
Resize 20% and 60%
Free rotate left 20 degrees.

Open up the Flowers template layer.
Copy and paste Silk Bows of your choice as new layers.
Resize 25%
Position them over the template flowers.
I also used Silk Flower and resized 25% and 30%.
Delete the flower template layer.
Highlight your white background.
New Raster layer.
Copy and paste a paper of choice Into Selection.
Deselect.
Apply the mask.
Resize 110%
Merge Group.

Add your copyrights.

Add your name.

Resize all layers 85%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my Show Arena.
Email me!
Hugs,
Bev