Saturday, May 7, 2011

Spring Cleaning



Supplies

1 tube and 1 close up image of choice - I used the artwork of Tony Tzanoukakis at PSP Tubes Emporium. You must have a license to use.

Font of choice - I used Oh Lara - a pay font

Monti Circular Mask here

Eyecandy 3.1 - Glow

“Lemon Scent ” is a tagger size scrap kit created by Kesha of KnC Scrapz and can be purchased from Lollipops n Gumdrops. You can visit her blog here. Thank you Kesha for such a bright and breezy spring !

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

New Raster layer.
Make your Selection Tool active set on Ellipse.
Create a 650 x 350 pixel oval.
Copy and paste Paper 7 Into Selection.
Deselect.
Apply Eyecandy 3.1 - Glow:
Width: 5
Opacity: 100
Opacity Drop off: Fat
Color: white

Make your Selection Tool active set on Circle.
Create a 500 pixel circle.
Copy and paste Paper 9 Into Selection.
Copy and paste your Close up as a new layer over the paper layer.
Move into position.
Selection/Invert
Tap the delete key.
Deselect.
Change the Properties to Overlay.
Highlight the Circle paper layer and apply Eyecandy 3.1 - same glow effect.

Copy and paste Frame as a new layer.
Resize 40%
Free rotate Left 15 degrees.
Move into position near the bottom of the circle - see my tag for reference.
Duplicate/Move this one into position behind the upper right side of the circle.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 10 Into Selection.
Deselect.
Highlight the frame that’s in front of the circle.
Click inside of it with your Magic Wand.
New Raster layer below the frame.
Copy and paste Paper 10 Into Selection.
Copy and paste your tube below the frame.
Selections/Invert
Tap the delete key.
Deselect.

Add your embellishments. I used:
Bow 2: Resize 25%/Duplicate/Mirror
Cupwflowers: Resize 25% and 80%/Mirror
Flower: Resize 35%/Duplciate/Mirror
Wreath: Resize 70%
Grass: Resize 25%
Grass again: Resize 40%
Butterflies: Choose one you like/resize/duplicate as you like

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 4 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name:
Apply the same Glow effect.

Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev

Tuesday, May 3, 2011

Ocean Dreams



Supplies

1 tube of choice - I used the artwork of Anna Marine at CDO. You must have a license to use.

Font of choice - I used Clive Barker here

Gem Mask 129 here

Eyecandy 3.1 - Glow

“Ocean Dreams ” is a tagger size scrap kit created by Grazy of Creation by Grazy and can be purchased from Aussie Scrap Designs. You can visit her blog here. Thank you Grazy for a fabulous ocean themed kit!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste (19) as a new layer.
Resize 40%
You might want to close out your white background so you can see the element.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 16 Into Selection.
Copy and paste (79) as a new layer below the frame.
Resize 50%
Move into position.
Selections/Invert
Tap the delete key.
Deselect.
Merge Visible the frame, starfish, and paper layers.
Give it a drop shadow.
Reopen your white canvas.
Duplicate the merged layer.
Free rotate Left 8 degrees.
Move both layers into better position.

Copy and paste (82) as a new layer.
Resize 25% and 70%
Free rotate Left 8 degrees.
Duplicate/Mirror
Move both frames into position - see my tag for reference.

Highlight the frame on the right.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 4 Into Selection.
Deselect.

Copy and paste your tube as a new layer.
Position in front of the right frame.

Highlight the frame on the left.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Paste Paper 4 Into Selection.
Deselect.
Copy and paste your tube below the frame.
Mirror it to the tube that you put in front of the right frame.
Highlight the paper layer and click anywhere outside of it with your Magic Wand.
Highlight the tube layer.
Tap the delete key.
Deselect.

Add your embellishments. I used:
83: Resize 50%
84: Resize 40%/Mirror
89: Resize 40%/Mirror
101: Resize 33%
77: Resize 45%/Erase what you don’t want to be seen
86: Resize 35%
97: Resize 25% and 70%

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 9 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name:
Apply Eyecandy 3.1 - Glow:
Width: 3
Opacity: 100
Opacity Drop off: Fat
Color: white

Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev

Monday, May 2, 2011

Honey Bee



Supplies

The cookie used in this tutorial (included with the kit) is created by Lisa K. Please visit her blog here

Font of choice - I used Curly Cue here

Becky Mask 22 here

Divine Intentionz Template 353 here

Eyecandy 3.1 - Glow

“Honey Bee ” is a tagger size scrap kit created by Kara of Sweet Cravings Scraps and can be purchased from TKO Scraps. You can visit her blog here. Thank you Kara for a fantabulous kit to kick off May!!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up the template.
Shift + D.
Close out the original.
Resize all layers 80%
Image/Canvas Size 700 x 500
Open up the background layer and flood fill white.
Delete the top 4 layers, both Pixel Wording layers, Heart, and Glittered Heart layers.

Copy and paste Honey Bee Frame 7 as a new layer.
Resize 25%
Duplicate/Free rotate Right 8 degrees
Duplicate/Mirror
Move all 3 frames into position over Frame template layer.
Delete Frame template layer and Frame Background template layer.

Highlight one of the frames.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 1 Into Selection.
Deselect.

Repeat the above step with the remaining 2 frames.

Highlight Glittered Circle Right layer.
Click anywhere outside of it with your Magic Wand.
Selections/Invert
New Raster layer.
Copy and paste Paper 9 Into Selection.
Adjust/Add Remove Noise/Add Noise:
Gaussian and Monochrome checked’
Nosie: 50%
OK
Deselect.
Delete the template layer.

Highlight Glittered Circle Left layer.
Repeat the above step.

Highlight Circle Right layer.
Click anywhere outside of it with your Magic Wand.
Selections/Invert
New Raster layer.
Copy and paste Paper 16 Into Selection.
Deselect.
Delete the template layer.

Highlight Circle Left layer.
Repeat the above step.

Highlight Circle Top Left layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 8 Into Selection.
Deselect.
Delete the template layer.
Apply Eyecandy 3.1 - Glow:
Width: 5
Opacity: 100
Opacity Drop off: Fat
Color: #311d08

Highlight Circle Bottom Right template layer.
Repeat the above step.

Highlight Circle Center layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 7 Into Selection.
Deselect.
Delete the template layer.
Apply the same glow effect.

Add your embellishments. I used:
From the cookies folder - Butterscotch 2: Resize 45%
Tree: Resize 60%
Flower 7: Resize 60%
Flower 9: Resize 30%/Duplicate/Mirror/Resize 70%
Bee House: Resize 50%
Wheat; Resize 50%/Duplicate/Mirror
Cute Bee 1 & 2: Resize 25% and 50%
Butterfly: Resize 25% and 60%

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 13 Into Selection.
Deselect.
Apply the mask.
Use your Pick Tool to pull the sides and bottom out slightly.
Merge Group.

Add your copyrights.

Add your name:
Apply the same glow effect accept change the Width to 3 and color to #f9d200.

Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev

Sunday, May 1, 2011

Garden Delights



Supplies

1 tube of choice - I used the artwork of Anna Marine whoch can be purchased from CDO. You must obtain a license to use.

Font of choice - I used CAC Shishoni Brush here

Weescotlass Mask 297 here

Divine Intentionz Template 268 here

Greg’s Factory Output Vol. II - Pool Shadow

Eyecandy 3.1 - Glow

“Garden Delights ” is a tagger size scrap kit created by Krissy of Krissy’s Scraps and can be purchased from her store Exquisite Scraps. You can visit her blog here.

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up the template.
Shift + D.
Close out the original.
Resize all layers 90%
Image/Canvas Size 700 x 500
Open up the background layer and flood fill white.
Delete the top 3 layers.

Highlight Large Circle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 10 Into Selection.
Deselect.
Delete the template layer.
Apply Eyecandy 3.1 - Glow:
Width: 5
Opacity: 100
Opacity Drop off: Fat
Color: White

Highlight Circle 1 layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 9 Into Selection.
Deselect.
Delete the template layer.

Highlight Center Rectangle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 11 Into Selection.
Apply Greg’s Factory Output Vol. II - Pool Shadow:
Default settings.
Deselect.
Copy and paste Cloud 1 as a new layer.
Resize 40%
Position over the paper.
Copy and paste Cherry Tree 1 as a new layer about the paper layer.
Resize 60%
Move into position to one side of the rectangle - see my tag for reference.
Duplicate/Mirror
Highlight Center Rectangle template layer.
Click anywhere outside of it with your Magic Wand.
Highlight each of the tree layers and tap the delete key.
Deselect.
Delete the template layer.

Highlight Thin Rectangle 1 layer.
Click anywhere outside of it with your Magic Wand.
Copy and paste Paper 12 as a new layer over the template layer.
Resize 60%
Move into position.
Tap the delete key.
Deselect.
Delete the template layer.

Highlight Thin Rectangle 2 layer.
Repeat the above step.

Highlight Dotted Line layer.
Select All/Float/Defloat
New Raster layer.
Copy and paste Paper 11 Into Selection.
Deselect.
Duplicate/Merge Down.
Delete the template layer.

Highlight Frame Left layer.
Click on it with your Magic Wand.
New Raster layer.
Paste Paper 11 Into Selection.
Deselect.
Delete the template layer.
Give it a slight Inner Bevel:


Highlight Frame Right layer.
Repeat the above step.

Highlight Frame Back layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 3 Into Selection.
Deselect.
Delete the template layer.

Repeat the above step with the other Frame Back template layer.

Highlight the frame paper on the right.
Click anywhere outside of it with your Magic Wand.
Copy and paste your tube as a new layer.
Position over the paper.
Tap the delete key.
Deselect.

Highlight the frame back paper on the bottom.
Click anywhere outside of the paper with your Magic Wand.
Copy and paste Watering Can 1 as a new layer.
Resize 80%
Move into position - see my tag for reference.
Tap the delete key.
Deselect.
Paste the watering can again.
Resize 60%
Position in front of the frame.

Add your embellishments. I used:
Butterfly 1: Resize 25%
Staple 2: Resize 25% and 70%/Duplicate
Painted Bird 1: Resize 40%
Feather 1: Resize 40%
Ribbon 1: Resize 60%
Natural Bloom 3: Resize 25% and 80%/Duplicate/Flip/Resize 80%/Duplicate/Mirror

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 4 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name:
Give it the same Inner Bevel.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,

~♥~ Gallery 2014~♥~

~♥~ Credits ~♥~

Kit Used: Sunshine by Lisete Scrap


Blog Installation and Customization By: Krissy of Krissy's Scraps & Imaging

  © Blogger template Customization and Installation by Krissy's Scraps 2011

Back to TOP