Saturday, September 3, 2011

Reflections of Yesteryear


Supplies

1 tube of choice - I used the artwork of Jennifer Janesko which can be purchased from CDO. You must have a license to use.

Font of choice - I used Respective here

Weescotlass Mask 236 here

Plug Ins:
Brush Strokes - Sprayed Strokes

“Reflections of Yesteryear” is a tagger size scrap kit created by Karen of Sweet Occasion Designs and can be purchased from Butterfly Blush Designs. You can visit her blog here.
Thank you Karen for a gorgeous classy kit!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood Fill white.

Copy and paste fetedesperes_17 as a new layer.
Resize 50%
Free rotate Left 90 degrees
Move to the left side of your canvas.

Make your Selection Tool active set on Ellipse.
Make an oval approximately 300 x 425 pixels.
New Raster layer.
Copy and paste Paper 5 Into Selection.
Selection/Modify/Contract by 14.
Tap the delete key.
Deselect.
Give it a slight Inner Bevel:


Move the element frame and the oval frame into position - see my tag for reference.

Highlight the element frame.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 11 Into Selection.
Deselect.

Open up Paper 8.
Apply Brush Strokes - Sprayed Strokes:


Copy.

Highlight the Oval Frame.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Paste the paper Into Selection.
Deselect.

Open up Hanging Ribbon 3 and 4.
Section out a large area on each of them.

Make your Selection Tool active again set on Rectangle.
New Raster layer.
Make a rectangle approximately 40 x 475 pixels
New Raster layer.
In your layers pallet, set on Pattern, look for Hanging Ribbon 3.
Set the scale to 50.
Flood fill the layer with the pattern.
New Raster layer.
Flood fill with Hanging Ribbon 4.
Deselect.
Give each rectangle a slight Inner Bevel:

Move both rectangle into position - see my tag for reference.

Make your Selection Tool active again, still set on Rectangle.
Make a rectangle approximately 540 x 75 pixels.
New Raster layer.
Copy and paste Paper 1 Into Selection.
Deselect.
Give it the same slight Inner Bevel.

If you’re using the same tube I did, I used the Target Tool and changed the rose to green.

Copy and paste your tube as a new layer.
Position it on the right side of your canvas - see my tag for reference.
Duplicate
Mirror
Move the duplicated layer below the frame in your layers pallet.
Erase whatever part of the tube that might overhang the frame.
Change the Properties to Soft Light.

Open up the Gold Vintage Accessories_Vanity element.
Using your Selection tool, section off from the bottom of the mirror up.
Copy.
Make your working canvas active.
Paste
Position behind the left side of the frame.

Add your embellishments. I used:
From the Reflectons of Yesteryear folder -
Mon 4: Resize 70%
Cout.8: Resize 25% and 80%
Tel 1: Resize 35%
Faradisers 15: Resize 25% and 50%
From Reflections of Yesteryear 2 folder -
Button 1: Resize 40%/Free rotate Right 30 degrees
Tag 4: Resize 30%

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 6 Into Selection.
Deselect.
Apply the mask.
Resize 105%
Merge Group.

Add your copyrights.

Add your name:
In your color pallet:
Foreground and Background: #22180c
Type your name out.
Convert to Raster layer.

Foreground and Background: #c2a36d
Type your name out again.
Convert to Raster layer.

Move the tan colored name below the Dark brown name.
Match both layer names up and move the dark brown one slight up and to the left.
Merge Down.
Give it a drop shadow.

Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


Friday, September 2, 2011

Music of the Fairy

Link

Supplies

1 tube of choice - I used the artwork of Susan McKirvergan which can be purchased from Up Your Art. You must have a license to use.

Font of choice - I used Respective here

Becky Mask 22 here

“Teal Petals” scrap kit is available in both tagger and full size and was created by Kesha of KnC Scrapz and can be purchased from her store Lollipops n Gumdrops. You can visit her blog here.
Thank you Kesha for yet another beautiful kit!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood Fill white.

Copy and paste Frame 1 as a new layer.
Resize 65%
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 9 Into Selection.
Deselect.

Copy and paste Frame 1 again as a new layer.
Resize 35%
Duplicate
Move both frames into position - see my tag for reference.

Highlight the top little frame.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 2.
New Raster layer below the frame.
Copy and paste Paper 10 Into Selection.
Copy and paste your tube as a new layer.
Position over the paper.
Selections/Invert
Tap the delete key.
Deselect.
Change the Properties to Overlay.

Highlight the bottom frame.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 2.
New Raster layer below the frame.
Copy and paste Paper 10 Into Selection.
Copy and paste Flower Bucket as a new layer.
Resize 25% and 80%
Position over the paper.
Selections/Invert
Tap the delete key.
Deselect.
Change the Properties to Overlay.

Copy and paste your tube as a new layer.

Add your embellishments. I used:
Flower Bucket: Resize 25% and 50%
Element 4: Resize 50%
Flower 6: Resize 25%
Light: Resize 75%
Flower: Resize 25%
Bow 5: Resize 25%
Butterfly: Resize 25%/Duplicate/Resize 70%/Duplicate/Mirror

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 6 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name:

Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


Rustling Leaves



Supplies

1 tube of choice - I used the artwork of Anna Marine which can be purchased from CDO. You must have a license to use.

Font of choice - I used Wrteched here

My Mask 25 here

“Rustling Leaves” is a tagger size scrap created by Dani of Darkmoon’s Dream and can be purchased from Lollipops n Gumdrops. You can visit her blog here.
Thank you Dani for a really beautiful autumn kit!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood Fill white.

Copy and paste Frame 3 as a new layer.
Resize 65%
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
Copy and paste Paper 2 as a new layer below the frame.
Resize 65%
Selections/Invert
Tap the delete key.
Copy and paste Tree as a new layer below the frame.
Resize 70%
Move into position.
Tap the delete key.
Deselect.

Copy and paste your tube as a new layer.

Add your embellishments. I used:
Squirrel: Resize 25%
Acorns 01: Resize 25%
Bow 3: Resize 40%/Duplicate
Deco 3: Resize 50%
Branch: Mirror
Bird: Resize 25% and 70%
Scarecrow 01: Resize 60%

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 9 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Change the Properties of the scarecrow to Soft Light.

To give the branch the feathered look on the end:
Highlight the merged mask layer.
Use your Magic Wand and click in the upper right corner of your canvas.
Highlight the branch layer.
Tap the delete key.
Deselect.

Add your copyrights.

Add your name:
Color Pallet:
Foreground: Black
Background: Pattern/Paper 1
Stroke: 1
Using trial and error, toy around with the scale of the pattern/Paper 1 to get the burned look at the bottom of your name.
Give it a slight Inner Bevel:


Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


Thursday, September 1, 2011

DRDQ 17


Supplies

Poser used in this tutorial is by Designed by K and supplied in the kit. You can visit her blog here

Font of choice - I used AL Sandra here

Gem Mask 70 here

Plug Ins:
Eyecandy 3.1 - Glow

“Dorm Room Drama Queen” is a scrap kit created by Ann of KC Scrappin Santuary and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Ann for your adorable contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste Round Frame as a new layer.
Move slightly to the right on your canvas.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4
New Raster layer below the frame.
Copy and paste Paper 10 Into Selection.
Copy and paste Riley CU1 as a new layer below the frame.
Selections/Invert
Tap the delete key.
Deselect.

Add your embellishments. I used:
Riley CU1
Flwr2: Resize 30%
Flwr1: Resize 30% and 70%
Doodle 2

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 6 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name:
Apply Eyecandy 3.1 - Glow:
Width: 3
Opacity: 100%
Opacity Drop off: Fat
Color: White
OK

Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


DRDQ 16



Supplies

Poser used in this tutorial is by © Krissy’s Imaging. You can visit her blog here.

Font of choice - I used AL Sandra here

Gem Mask 8 here

Plug Ins:
Eyecandy 3.1 - Glow

“Dorm Room Drama Queen” is a scrap kit created by Pixie of KissedbyPix and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Pixie for your awesome contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Make your Selection Tool active set on Rectangle.
Make a rectangle approximately 525 x 300 pixels.
New Raster layer.
Copy and paste Paper 1 Into Selection.
Selections/Modify/Contract by 8.
New Raster layer.
Flood fill with a gradient of your choice.
Copy and paste Mask 2 as a new layer.
Move into Position.
Selections/Invert
Tap the delete key.
Deselect.

Highlight the larger rectangle and apply Eyecandy 3.1 - Glow:
Width: 3
Opacity: 100
Opacity Drop off: Fat
Color: White
OK

Add your embellishments. I used:
Skull Frame 6
Skull Line 1
Star Cluster 6: Resize 60%
Pixie Drum Set: Resize 60%
Pixie 3: Resize 80%

Crop your image.

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 6 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name:

Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev

DRDQ 15



Supplies

Poser used in this tutorial is by © Angelic Poserz and came with the kit.

Font of choice - I used Honey Script Light here

Monti Circular Mask here

Plug Ins:
Mura’s Meister - Copies
Xenofex 2 - Crumple

“Dorm Room Drama Queen” is a scrap kit created by ZaZa of Scrap and Tubes and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you ZaZa for your beautiful contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste EL 19 as a new layer.
Resize 25% and 70%
Apply Mura’s Meister - Copies:
Set to Encircle
Change Number to 14
OK
You should not have a round flower frame.

Make your Selection Tool active set on Circle.
Position your mouse in the center of the circle frame, hold down on the mouse key and pull outward until the line runs through the center of the flowers.
New Raster layer below the frame.
Flood fill with #b3e7ff
Deselect.
Apply Xenofex 2 - Crumple
Crumple Size: 126.11
Crumple Force: 15
Uncheck Distort Image
OK

Add your embellishments. I used:
3: Resize 40%
7: Resize 30%
16: Resize 25% and 50%
14: Resize 25% and 35%
Bubbles C1 (the poser)
9: Resize 70%/Free rotate Right 20 degrees
10: Resize 70%/ Free rotate Right 35 degrees/Duplicate/Free rotate Right 15 degrees

Crop your image.

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 3 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name:

Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


DRDQ 14



Supplies

The wonderful poser used in this tutorial is by Lou of Designz by Lou. You can visit her blog here.

Font of choice - I used Second Lyrics here

Becky Mask 22 here

“Dorm Room Drama Queen” is a scrap kit created by Lou of Designz by Lou and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Lou for your beautiful contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Make your Selection Tool active set on Rectangle.
Make a rectangle approximately 525 x 300 pixels.
New Raster layer.
Copy and paste Paper 1 Into Selection.
Selections/Modify/Contract by 7.
New Raster layer.
Copy and paste Paper 2 Into Selection.
Deselect.

Add your embellishments. I used:
Scatter 3
Pencil 1: Resize 40%
Blue Gemstone: Resize 25% and 50%/Duplicate as many times as you like and use your Pick Tool to turn this way and that
Books 2: Resize 50%
Jessica 2

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 4 Into Selection.
Deselect.
Apply the mask.
Merge Group.
Duplicate

Add your copyrights.

Add your name:
Use your Pick Tool and tilt it slightly.

Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


DRDQ 13



Supplies

The adorable poser used is by Krissy’s Imaging. You can visit her blog here.

Font of choice - I used Luna Bar here

Becky Mask 23 here

“Dorm Room Drama Queen” is a scrap kit created by Mandy of Diva Designz and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Mandy for your beautiful contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste Frame as a new layer.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 2 Into Selection.
Deselect.

Add your embellishments. I used:
Queen 4 (from Krissy’s Imaging folder): Resize 35%
Flower Button: Resize 25%/Duplicate/Resize 70%
Books: Resize 30%
Microphone: Resize 60%/Mirror
Speaker: Resize 30%
Peppermint Stick: Resize 60%/Free rotate Right 25 degrees
Peppermint Stick 2: Resize 60%/Free rotate right 15 degrees

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 4 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name:
Give it a slight Inner Bevel:


Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


DRDQ 12



Supplies

1 tube of choice - I used the adorable artwork of MediEvil Creations. You can visit her blog here

Font of choice - I used Wretched here

Weescotlass Mask 241 here

“Dorm Room Drama Queen” is a scrap kit created by Jackie of Galerie Jackie and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Jackie for your beautiful contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste 26 as a new layer.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 31 Into Selection.
Copy and paste (from Medi’s folder) DormDrama 6 as a new layer below the frame.
Move into position.
Selections/Invert
Tap the delete key.
Deselect.
Change the Properties to Soft Light.

Add your embellishments. I used:
DormDrama 6: Mirror
3
5


Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 28 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name:
Give it a slight Inner Bevel:


Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


DRDQ 11



Supplies

Font of choice - I used Cutscript here

My Mask 25 here

“Dorm Room Drama Queen” is a scrap kit created by Shelle of Shellez Creations and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Shelle for your adorable contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste 29 as a new layer.
Resize 80%
Free rotate Left 5 degrees.
Click inside of each square with your Magic Wand.
New Raster layer below the frame.
Selections/Modify/Expand by 4.
Copy and paste Paper 6 Into Selection.
Copy and paste Nokole 6 as a new layer below the right side of the frame.
Move into position - see my tag for reference.
Selections/Invert
Tap the delete key.
Deselect.
Change the Properties to Soft Light.

Close out your white background.
Merge Visible.
Reopen your white background.

Add your embellishments. I used:
33: Resize 40%
24: Resize 40%
28: Resize 25%/Duplicate/Mirror
21: Resize 25%/Duplicate/Mirror
15: Resize 60%/Duplicate/Mirror/Flip
Nokole 6

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 10 Into Selection.
Deselect.
Apply the mask.
Merge Group.
Duplicate

Add your copyrights.

Add your name.
Give it a slight Inner Bevel:


Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


DRDQ 10


Supplies

Font of choice - I used Adolphus here

Mask 71 here

“Dorm Room Drama Queen” is a scrap kit created by Cindy of Puddicat Creations and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Joy for your fantastic contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste Frame 1 as a new layer.
Resize 85%
Click inside of it with your Magic Wand.
New Raster layer below the frame.
Selections/Modify/Expand by 4.
Copy and paste Paper 3 Into Selection.
Deselect.

Add your embellishments. I used:
Flower 1: Resize 35/Duplicate
Star 1: Resize 60%/Mirror
Milkshake 1: Resize 70%
Wild Thing CK 1

Crop you image.

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 2 Into Selection.
Deselect.
Apply the mask.
Resize 105%
Merge Group.

Add your copyrights.

Add your name.
Give it a slight Inner Bevel:


Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev

DRDQ 9



Supplies

The cookie used in this is by Krissy of Krissy’s Imaging and came with the kit. You can visit her blog here.

Font of choice - I used Kayleigh here

Monti Circular mask here

“Dorm Room Drama Queen” is a scrap kit created by Joy of Mystic Creations and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Joy for your fantastic contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste Bread Frame as a new layer.
Resize 70%
Click inside of it with your Magic Wand.
New Raster layer below the frame.
Copy and paste Paper 3 Into Selection.
Deselect.

Add your embellishments. I used:
Dayna 1
Loopy Bow: Resize 30%
Notebook: Resize 35%/Free rotate Left 15 degrees
Book stack: Resize 30%
Pen: Resize 40%
Painted Butterfly: Resize 25% and 70%

Crop you image.

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 9 Into Selection.
Deselect.
Apply the mask.
Merge Group.
Duplicate

Add your copyrights.

Add your name.
Give it a slight Inner Bevel:


Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev

DRDQ 8



Supplies

1 tube of choice - I used the artwork of Dean Yeagle which can now be purchased at CDO. You must have a license to use.

Font of choice - I used Mayuge here

Weescotlass Mask 297 here

Divine Intentionz Template 358 here

“Dorm Room Drama Queen” is a scrap kit created by Lis of PSP Girl Place and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Lis for your fantastic contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up the template.
Shift + D.
Close out the original.
Resize all layers 85%
Image/Canvas Size
700 x 600
OK
Open up Raster 1.
Flood fill white.
Delete the following layers:
Top 2 layers, Heart 1, Heart 2, Heart 3.

Highlight Glitter Circle 1 layer.
Click anywhere outside of it with your Magic Wand.
Selections/Invert
New Raster layer.
Copy and paste Paper 7 Into Selection.
Adjust/Add Remove Noise/Add Noise:
Uniform and Monochrome checked
Noise: 43%
OK
Deselect.
Delete the template layer.

Highlight Glitter Circle Centre.
Repeat the above step.

Highlight Circle 1 layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 6 Into Selection.
Deselect.
Delete the template layer.

Copy and paste Element 42 as a new layer.
Resize 80%
Use your Pick Tool and pull the top down so that it fits nicely over Rectangle 1 layer - see my tag for reference.
Delete Rectangle 1 layer and Rectangle 2 layer.
Click inside the frame with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 4 Into Selection.
Deselect.
Delete the template layer.

Highlight Glitter Circle Left layer.
Click anywhere outside of it with your Magic Wand.
New Raster layer.
Copy and paste Paper 6 Into Selection.
Add the same noise effect.
Deselect.
Delete the template layer.

Highlight Glitter Circle Right layer.
Repeat the above step.

Highlight Circle Left layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 6 Into Selection.
Copy and paste Element 49 as a new layer.
Resize 45%
Position over the circle.
Selections/Invert
Tap the delete key.
Deselect.
Delete the template layer.

Highlight Circle Right layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 6 Into Selection.
Deselect.
Delete the template layer.

Highlight Circle Center layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 4 Into Selection.
Copy and paste your tube as a new layer over the circle.
Move into position.
Selections/Invert
Tap the delete key.
Change the Properties to Screen.
Deselect.
Delete the template layer.

Copy and paste your tube as a new layer.

Add your embellishments. I used:
9: Resize 40%
28: Resize 30%
21: Resize 25%
18 & 19: Resize 25%
20: Resize 25% and 70%
45: Resize 25% and 70%
16: Resize 80%/Duplicate

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 7 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name.

Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev

DRDQ 7



Supplies

1 tube of choice - I used the adorable artwork of MediEvil Creations. You can visit her blog here

Font of choice - I used Cricket here

Amy & Leah’s Mask 2 here

Plug Ins:
Mura’s Mesiter - Cloud

“Dorm Room Drama Queen” is a scrap kit created by Lillian of Sunshine Scrap and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Lillian for your fun contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

In your color pallet set your Foreground and Background in shades of sky blues.

Copy and paste Summer Frame as a new layer.
Click inside each circle with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Apply Mura’s Meister - Cloud:
Use default settings
Click the Reset button.
Deselect.

Add your embellishments. I used:
Dorm Drama 4 - From Medi’s folder
Flower 3: Resize 60%
Banner

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 1 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Highlight the banner element.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name:
Give it a slight Inner Bevel:


Give elements of your choice an exaggerated drop shadow.

Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


DRDQ 6


Supplies

Font of choice - I used Al Sandra here

Monit Mask here

“Dorm Room Drama Queen” is a scrap kit created by Kara of Sweet Cravings Scraps and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Kara for your fun contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste Frame 1 as a new layer.
Resize 80%
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 1 Into Selection.
Deselect.

Copy and paste Frame 2 as a new layer.
Resize 80%
Use your Pick Tool and pull the top down a little.
Move it below the circular paper in your layers pallet.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 2 Into Selection.
Deselect.

Add your embellishments. I used:
Sugar Potpourri 2
Notebook: Resize 30%/Free rotate Left 15 degrees
Guitar: Resize 70%
Fuzzy Dice: Resize 30%
Bow 3: Resize 25%/Duplciate/Mirror

Crop your image.

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 3 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name:
Give it a slight Inner Bevel:


Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


DRDQ 5



Supplies

1 tube of choice - I used the beautiful artwork of Gary George which can be purchased from Up Your Art. You must have a license to use.

Font of choice - I used Oh Lara - a pay font

My mask 20 here

“Dorm Room Drama Queen” is a scrap kit created by Melissa of P&A Dezigns and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Melissa for your beautiful contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste 9 as a new layer.
Use your Selection Tool set on Rectangle and outline the window:


New Raster layer below the window.
Copy and paste Paper 5 Into Selection.
Deselect.

Copy and paste your tube as a new layer.

Add your embellishments. I used:
6
7: Resize 25% and 70%
10: Free Rotate Left 90 degrees

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 2 Into Selection.
Deselect.
Apply the mask.
Merge Group.
Duplicate/Change the Properties to Multiply
Duplicate

Add your copyrights.

Add your name:
Give it a slight Inner Bevel:


Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


DRDQ 4



Supplies

1 tube of choice - I used the artwork of Jennifer Janesko which can now be purchased from CDO. You must have a license to use.

Font of choice - I used Ecolier here

Becky Mask 23 here

“Dorm Room Drama Queen” is a scrap kit created by Lisa of EAL Designs and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Lisa for your fabulous contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Paste the following elements on your canvas and move into position - see my tag for reference.
13
4: Resize 80%/Free rotate Right 90 degrees
10
14: Resize 70%/Free rotate Left 5 degrees
9: Resize 60%
3: Resize 50%/Mirror

Copy and paste Element 6 as a new layer.
Use your Freehand Selection Tool and outline the top mirror.
Copy and paste your tube as a new layer.
Position it over the mirror.
Selections/Invert
Tap the delete key.
Selections/Modify/Inside Outside Feather:
Both checked
Feather amount: 23
OK
Tap the delete key a couple of times.
Deselect.
Change the Properties to Multiply.
Duplicate/Flip
Position over the bottom mirror.
Merge Visible the tubes and mirror layer.
Resize 70%

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 4 Into Selection.
Deselect.
Apply the mask.
Merge Group.
Duplicate

Add your copyrights.

Add your name:
Give it a slight Inner Bevel:


Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev

DRDQ 3


Supplies

Poser used is by ©Moody Designz and is included in the kit. You can visit her sit here

Font of choice - I used Annabelle - I’m sorry I couldnLink’t find a link

Mask 71 here

“Dorm Room Drama Queen” is a scrap kit created by Deb of Debs Designs and is part of a collaboration that can be purchased at TKO Scraps and is available in tagger and full size. You can visit her blog here.
Thank you Deb for your adorable contribution!

Plus Ins:
Eyecandy 3.1 - Glow

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Make your Selection Tool active set on circular.
Create a circle approximately 400 pixels - don’t worry if it’s not centered.
New Raster layer.
Copy and paste Paper 1 Into Selection.
Adjust/Blur/Gaussian Blur:
Radius: 20
OK
Adjust/Add Remove Noise/Add Noise:
Uniform and Gaussian checked
Noise: 43%
OK
Deselect.

New Raster layer.
Change your Selection Tool to rectangle.
Create a rectangle approximately 150 x 500 pixels.
Copy and paste Paper 2 Into Selection.
Adjust/Blur/Gaussian Blur:
Radius: 20
OK
Add the same Noise effect.
Deselect.

New Raster layer.
Create a rectangle approximately 125 x 600 pixels.
Copy and paste Paper 1 Into Selection.
Adjust/Blur/Gaussian Blur:
Radius: 20
OK
Add the same noise effect.
Deselect.

Move all layers into position - see my tag for reference.

Highlight the largest rectangle.
Click anywhere outside of it with your Magic Wand.
Selections/Invert
Selections/Modify/Contract by 8
New Raster layer.
Flood fill with a gradient of your choice.
Apply Eyecandy 3.1 - Glow
Width: 3
Opacity: 100
Opacity Drop off: Fat
Color: White
OK
Deselect.

Highlight the smaller rectangle.
Repeat the above step.

Highlight the Circular layer.
Click anywhere outside of it with your Magic Wand.
Selections/Invert
Selections/Modify/Contract by 8
New Raster layer.
Flood fill with a gradient of your choice.
Effect/Texture Effects/Texture
Match your settings to mine:


Apply Eyecandy 3.1 - Glow
Width: 3
Opacity: 100
Opacity Drop off: Fat
Color: White
OK
Deselect.

Add your embellishments. I used:
Flower Feather 2
Award 2: Resize 45%
Bear: Resize 35%
Game Machine: Resize 25%
Notes: This is behind the circle layer with noise
Lip 1: Resize 40%/Free rotate Left 15 degrees
Guitar 2: Resize 70%/Mirror/Free rotate Left 5 degrees
Backpack: Resize 50%/Mirror
Jazmine: (Moody Designz folder) Resize 75%

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 2 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Crop your image.

Add your copyrights.

Add your name:
Give it a slight Inner Bevel:


Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev

DRDQ 2



Supplies

2 tubes of choice - I used the artwork of Keith Garvey which can now be purchased from PSP Tubes Emporium

Font of choice - I used Boomerang here

Weescotlass mask 267 here

“Dorm Room Drama Queen” is a tagger size scrap kit created by Dianna of Digicats(and Dogs) and is part of a collaboration that can be purchased at TKO Scraps available in full or tagger size. You can visit her blog here.
Thank you Dianna for your totally fun contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Open up Paper 3.
Shift + D
Close out the Original.
Adjust/Blur/Gaussian blur:
Radius: 20
OK
Copy
Close this out as you won’t be needing it any more.

New Raster layer.
Make your Selection Tool active set on Rectangle.
Create a rectangle 400 x 275
Paste
Adjust/Add Remove Noise/Add Noise:
Uniform and Monochrome checked.
Noise: 43%
OK.
Deselect.
DO NOT DROP SHADOW THIS LAYER YET.

Copy and paste Frame 3 as a new layer.
Resize 60%
Move the frame and rectangle layers into position - see my tag for reference.

Highlight the frame layer.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 9 Into Selection.
Copy and paste your tube as a new layer below the frame.
Selections/Invert
Tap the delete key.
Deselect.
Change the Properties to Overlay.

Highlight the rectangle layer.
Click anywhere outside of it with your Magic Wand.
Selections/Invert
Selections/Modify/Contract by 7.
Copy and paste Paper 7 as a new layer.
Resize 45%
Move into position.
Selections/Invert
Tap the delete key.
Copy and paste Penant as a new layer.
Resize 65%
Move into position.
Tap the delete key.
Change the Properties to Luminance.
Copy and paste your tube as a new layer.
Move into position.
Tap the delete key.
Change the Properties to Luminance Legacy.
Lower the Opacity to about 42 or so.
Deselect.

Copy and paste your tube as a new layer.

Add your embellishments. I used:
Film Strip
Ticket: Resize 60%/Free rotate Left 70 degrees/Duplicate/Free rotate Left 35 degrees
Star: Resize 25% and 70%/Duplicate/Mirror/Resize 70%
Megaphone: Resize 85%
Lights: Resize 45%
Spotlight
Film: Resize 30%/Duplciate/Resize 70%
Books: Resize 25%
Director’s Chair: Resize 50%

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 4 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name:
Color Pallet:
Foreground: #000000
Background: Pattern/Paper 4.
Stroke: 1.5
Type your name.
Give it a slight Inner Bevel:


Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev

DRDQ 1



Supplies

Font of choice - I used Luna Bar here

Becky Mask 22 here

“Dorm Room Drama Queen” is a scrap kit created by Crys of Creative by Scraps and is part of a collaboration and can be purchased at TKO Scraps available in full or tagger size. You can visit her blog here.
Thank you Crys for your beautiful contribution!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste Frame 1 as a new layer.
Resize 60%
Free rotate Left 80 degrees.
Duplicate/Mirror

Move both mirrors into position - see my tag for reference.

Highlight the frame on the left.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 6 Into Selection.
Deselect.

Add the following elements below the frame and move into position - see my tag for reference. Don’t worry about what hangs outside of the frame. We’ll clean that up in a bit.
El 13: Resize 50%
El 8: Resize 25%
El 10: Resize 25% and 40%
El 4: Resize 25% and 40%

Highlight the paper layer.
Click anywhere outside of it with your Magic Wand.
Highlight each element layer that’s sticks outside of the frame and tap the delete key.
Deselect.

Highlight the Right Frame.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 6 Into Selection.
Deselect.

Add your embellishments. I used:
El 34: Mirror
El 11
El 24: Resize 40%
El 1, 2, and 3: Resize 30%

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 5 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name:
Color Pallet:
Foreground: #000000
Background: Pattern/Paper 6.
Stroke: 1.5
Type your name.
Give it a slight Inner Bevel:


Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


Wednesday, August 31, 2011

Whispers of Autumn



Supplies

1 tube of choice - I used the artwork of Anna Marine which can be purchased from CDO. You must have a license to use.

Font of choice - I used Aquarelle here

My Mask 27 here

“Whispers of Autumn” is a tagger size scrap created by me, HorsePlay’s Pasture Designs and can be purchased from any of my stores which are on my designing blog here.

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood Fill white.

Copy and paste 19 as a new layer.
Resize 65%
Free rotate Left 5 degrees
Use your Magic Wand and click inside of it.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 12 Into Selection.
Copy and paste your tube as a new layer.
Selections/Invert
Tap the delete key.
Deselect.

Close out your white canvas.
Merge Visible.
Reopen your white canvas.

Move the merged layer slightly to the left on your canvas.

Add your embellishments. I used:
20: Resize 60%
13: Resize 45%
14: Resize 35%
5: Mirror
11: Resize 55%
3: Resize 60%
7: Free rotate Left 40 degrees
17: Resize 40%/Flip
39: Resize 50%
2: Resize 25%
6
40: Mirror

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 9 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name

Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev


Monday, August 29, 2011

Neverland



Supplies

1 tube of choice - I used the artwork of Seline Fenech which can be purchased from CDO. You must have a license to use.

Font of choice - I used Wretched here

Monti Circular Mask here

Yvette Template 32 here.
I have uploaded and sharing as her site has been removed.

Plug Ins:
Eyecandy 3.1 - Glow

“Finding Neverland” is a tagger size scrap created by Jen of Sleek n Sassy Designz and can be purchased from her store Scrappin Dollar. You can visit her blog here.
Thank you Jen for an absolutely wonderful kit!

This tutorial was written assuming you have a working knowledge of PSP.

~♥~ Let’s get started ~♥~

Open up the template.
Shift + D.
Close out the original.
Image/Canvas Size:
600 x 600
OK
Flood fill the background layer white.
Delete the top 3 layers.

Highlight 1.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 8 Into Selection.
Copy and paste your tube over the paper layer.
Selections/Invert
Tap the delete key.
Deselect.
Delete the template layer.
Change the Properties to Soft Light.
To the paper layer apply Eyecandy 3.1 - Glow:
Width: 3
Opacity: 100
Opacity Drop Off: Fat
Color: White
OK

Repeat the above steps with layer 2.

Highlight 3 layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 8 Into Selection.
Deselect.
Delete the template layer.

Copy and paste your tube as a new layer.

Add your embellishments. I used:
37: Resize 25% and 80%/Mirror
29: Resize 25% and 80%
14: Resize 60%
17: Resize 50%
30: Resize 35%
42: Resize 50%/Lower the Opacity to about 36

Crop your image.

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 7 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your copyrights.

Add your name
Give it a slight Inner Bevel:


Resize all layers 80%.

I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev