Saturday, October 20, 2012

Template TOU Posted

It's been brought to my attention more than a few times lately that my templates are being shared throughout groups.  When I first started out creating templates I was naive to the fact they should have TOU included in them.  I've learned over the last few years and even though my older templates do not include my TOU they are now posted in the upper right corner of my blog and are to be followed for ALL MY TEMPLATES - OLD AND NEW.

No sharing in groups please and thank you.
Direct to my blog for download.

Hugs,
Bev 

Friday, October 19, 2012

Harvest of Blessings

Supplies

1 tube of choice – I used the artwork of Anna Marine which can be purchased from CDO.  You must have a license to use.

Font of choice – I used Inspiration here

Weescotlass Mask 362 here

Dee’s Sign Post “Calandra Craze” Template here
You can find it under Saturday, September 8, 2012.

“Harvest of Blessings” is a tagger size scrap kit created by me, Bev of HorsePlay’s Pasture Designs and can be purchased from  either of your favorite stores – Lollipops n Gumdrops or Butterfly Blush Designs or Inspirations of ScrapFriends.  You can visit my designing blog here.

~~ Lets get started ~~

Open up the template.
Shift + D.
Close out the original.
Delete the top 7 layers, Grunge Swirl layer, Green Circle, and Blue Circle layers.
Flood fill white.

Highlight Purple Square layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 7 Into Selection.
Deselect.
Delete the template layer.
Give it a slight inner Bevel.

Highlight Purple Rectangle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 4 Into Selection.
Deselect.
Delete the template layer.
Give it the same slight inner Bevel.

Highlight Orange Circle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 13 Into Selection.
Deselect.
Delete the template layer.
Give it the same slight inner Bevel.

Highlight Blue Oval layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 12 Into Selection.
Copy and paste your tube as a new layer over the paper layer.  Move into position – see my tag for reference.
Change the Properties to Soft Light.
Selections/Invert
Tap the delete key.
Deselect.
Delete the template layer.
Give the paper layer the same slight inner Bevel.

Highlight Green Rectangle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 15 Into Selection.
Deselect.
Delete the template layer.

Copy and paste your tube as a new layer.

Add your elements.  I used:
El 40:  Resize 40%
El 41:  Resize 25%
El 15:  Resize 30%
El 11:  Resize 40%
El 28:  Resize 50%/Position behind bottom left of oval paper/Duplicate/Resize 90%/position near upper right of tag behind rectangle shape
El 9:  Resize 50%/Mirror
El 61:  Resize 50%/Duplicate/Mirror
El 15:  Resize 25/Free rotate Left 30 degrees
El 58:  Resize 25%
El 59:  Resize 25%/Free rotate Right 25 degrees
El 60:  Resize 25%

Highlight your white background.
New Raster layer.
Select All.
Copy and paste Paper 10 Into Selection.
Deselect.
Apply the mask.
Resize 110%
Merge Group.

Add your credits.

Add your name.

Resize all layers 80%.

I’d love to see your results.
Email me!
Hugs,
Bev
 

Monday, October 15, 2012

Faith


Supplies

1 tube of choice – I’m using the beautiful artwork of Carol Moore which can be purchased from PSP Tube Stop.  At present the tube is included with the kit at a great savings to both tube and kit!  You must have a license to use.

Font of choice - I used Before the Rain here

Monti Circular Mask here

“Faith” is a tagger size scrap kit created by me, Bev of HorsePlay’s Pasture Designs and can be purchased from  PSP Tube Stop.  You can visit my designing blog here.

This tutorial was written assuming you have a working knowledge of PSP.

~~ Lets get started ~~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste El 13 as a new layer.
Resize 55%
Duplicate/Resize 85%
Move the larger frame down and to the left just a little and the smaller frame toward the upper right corner just a little – see my tag for reference.

Highlight the larger frame.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 3 Into Selection.
New Raster layer.
Copy and paste Paper 1 Into Selection.
Change the Properties to Multiply.
Copy and paste your tube as a new layer below the frame.
Selections/Invert
Tap the delete key.
Deselect.

Highlight the smaller frame.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer.
Copy and paste Paper 3 Into Selection.
New Raster layer.
Copy and paste Paper 1 Into Selection.
Change the Properties to Multiply.
Copy and paste your tube as a new layer below the frame – keep this tube layer resized a bit larger than the other tube layer.
Change the Properties to Luminance.
Selections/Invert
Tap the delete key.
Deselect.

Copy and paste El 31 as a new layer – be sure it’s at the top of your layers pallet because we’re going to work with this for a little bit.
Resize 60%/Mirror
Copy and paste El 55 as a new layer.
Resize 50%/Duplicate/Free rotate Left 90 degrees.
Position the vertical ribbon over the left edge of the ripped paper – see my tag for reference.
Position the horizontal ribbon along the top edge – see my tag for reference.  Use your Eraser Tool (hardness set to about 15) to erase what overhangs the tag.  With the hardness set so low use it to give the ribbon a feathered look near the ripped area of the tag.

Merge Visible both ribbon layers and the tag layer.
Duplicate
Move both merged layers into position – see my tag for reference.

Add your elements.  I used:
El 16:  Resize 40%/Mirror
El 39:  Resize 85%
El 18:  Resize 50%/Duplicate
El 17:  Resize 80%
El 35:  Resize 70%
El 28:  Resize 40%
El 71: Duplicate

Highlight your white background.
New Raster layer.
Select All.
Copy and paste Paper 14 Into Selection.
Deselect.
Apply the Mask.
Merge Group
Use your Pick tool to pull the top and bottom in just a little.
Duplicate
Crop your tag.

Add your credits.

Add your name.
Foreground and Background: #583a27
Type your name.
Give it a slight Inner Bevel:

Resize all layers 80%.

I’d love to see your results.
Email me!
Hugs,
Bev
 

~♥~ Gallery 2014~♥~

~♥~ Credits ~♥~

Kit Used: Sunshine by Lisete Scrap


Blog Installation and Customization By: Krissy of Krissy's Scraps & Imaging

  © Blogger template Customization and Installation by Krissy's Scraps 2011

Back to TOP