Saturday, November 3, 2012

Autumn Harmony

Supplies

1 tube and image of choice – I’m using the beautiful artwork of Mitzi Sato-Wiuff which can be purchased from PSP Tube Stop.  You must have a license to use.

Font of choice - I used Dean Martin here and Epifania here

Weescotlass Mask 208 here

My template 143 here

Plug Ins used:
Tramages – Tow the Line
DSB Flux – Bright Noise
Mura’s Meister – Cloud

This tutorial was written assuming you have a working knowledge of PSP.

~~ Lets get started ~~

Open up the template.
Shift + D.
Close out the original.
Image/Canvas Size
700 x 700
OK
Highlight the background layer.
Flood fill white.

Highlight Glitter Circle 1 layer.
Click anywhere outside of it with your Magic Wand.
Selections/Invert
New Raster layer.
Flood fill with #925c7d
Apply DSB Flux – Bright Noise:
Intensity: 20
Mix checked
OK
Deselect.
Delete the template layer.
Give it a slight Inner Bevel:

Repeat the above step with:
Glitter Rectangle
Top Glitter Square
Bottom Glitter Square

Highlight Circle 1 layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste the image layer (labeled “Original”) Into Selection.
Duplicate
Adjust/Blur/Gaussian Blur:
Radius: 5
OK
Apply Tramages – Tow the Line:
Use Default settings.
OK
Deselect.
Delete the template layer.

Color Pallet:
Foreground: #a19f3e
Background: #f1d381

Highlight Rectangle 1 layer.
Click on it with your Magic Wand.
New Raster layer.
Apply Mura’s Meister – Cloud:

Effects/Texture Effect/Mosaic Antique:
Use Default Settings.

Give it the same slight Inner Bevel.
Deselect.
Delete the template layer.

Highlight Rectangle 2 layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste the image layer (labeled “Original”) Into Selection.
Deselect.
Duplicate/Mirror – we’ll come back to this shortly.

In your layers pallet:
Merge Visible the top and bottom Glitter square layers – they’re the little squares you turned purple and added noise to.
Merge Visible the top and bottom Square template layers – be sure these are above the merged glitter square layer.
Click anywhere outside of the merged squares template layer.
Highlight the duplicated image layer and move this above the merged square template layer.
Tap the delete key.
Duplicate
Adjust/Blur/Gaussian Blur:
Radius: 15
OK
Copy and paste your tube as a new layer and position it over the blurred layer.
Tap the delete key.
Deselect.
Change the Properties of the tube layer to Soft Light.
Delete the merged template layer.

Copy and paste your tube again as a new layer.  Keep it at the top of your layers pallet.
Highlight Rectangle 2 template layer.
Click anywhere outside of it with your Magic Wand.
Use your Eraser Tool to erase the bottom area of the tube that overhangs the rectangle.
Deselect.
Delete the template layer.

Add the elements that came with this tube:
The cluster layer resize 70%
The berries layer resize 60%.
Paste the berries again:  Resize 40%/mirror

Color Pallet:
Foreground: #000000
Background: Nullss

Make your Ellipse Tool active set on Circle.
Create a circle that’s slightly larger than the glitter circle – it’s ok if the circle is slightly too larger or too small.
Objects/Align/Center in Canvas
Now you can resize the circle so that it’s only slightly larger than the glitter circle.

Color Pallet:
Foreground: #8d5211
Background:  #ec6321

Using the Epifania font, move your mouse along the center of the top of the circle.  When you see a rocking A click your mouse.  A text box will appear.  In it type:
October’s poplars are flaming torching lighting the way to winter.
Type it 2 times to make it around the circle.
Tip:  Type the entire sentence.  Did you find the font isn’t the correct size?  Highlight the entire line.
Right click
Cut
Change the font size
Highlight the text box.
Ctl + V
Your sentence will appear again. 
Ctl + V again.
Your sentence will appear again.
If it looks good on your tag click Apply.
I hope that tip helped.
In your layers pallet click the + sign.
Click on the eye of the New Ellipse layer to close it out.
Highlight Vector 1 layer.
Right Click.
Convert to Raster layer.

Highlight your white background.
New Raster layer.
Select All
Copy and paste the image layer Into Selection.
Deselect.
Adjust/Blur/Gaussian Blur:
Radius: 20
OK
Apply the Mask.
Resize 115%
Merge Group

Add your credits.

Add your name.
Foreground:  #a19f3e
Background: #97272f
Stroke: 1
Type your name.
Give it a slight Inner Bevel:

Resize all layers 80%.

I’d love to see your results.
Email me!
Hugs,
Bev
 

Friday, November 2, 2012

It's a Wonderland

Supplies

Font of choice – I used Retro Loops here

Monti Circular Mask here

Plug Ins used:
Eyecandy 5: Nature – Snow Drift

 “It’s a Wonderland” is a tagger size scrap kit created by me, Bev of HorsePlay’s Pasture Designs and can be purchased from  either of your favorite stores – Lollipops n Gumdrops or Butterfly Blush Designs or Inspirations of ScrapFriends.  You can visit my designing blog here.

~~ Lets get started ~~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste E26 as a new layer.
Resize 75%
Free rotate Left 90 degrees.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 3 Into Selection.
Deselect for now.

Add the following elements below the frame –  see my tag for reference.  Don’t worry about what overhangs the frame.  We’ll clean that up in a bit.
E63
E43:  Resize 40%
E44
E44 again:  Resize 25%/Duplicate/ Resize 70%
E65

Highlight the paper layer.
Click anywhere outside of it with your Magic Wand.
Highlight each element that overhangs the frame and tap the delete key.
Deselect.

Close out your white background layer.
Merge Visible.
Reopen your white background.

Copy and paste E27 as a new layer.
Resize 60%
Move into position behind the merged layer.

Copy and paste E26 as a new layer.
Resize 75%
Free rotate Left 90 degrees.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 3 Into Selection.
Deselect.
Merge Visible the frame and paper layer.
Move into position behind the round frame – see my tag for reference.
Duplicate.
Move in the opposite direction.

Copy and paste E27 as a new layer.
Resize 70%
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 9 Into Selection.
Deselect.
Merge Visible the frame and paper.
In your layers pallet move just above your white background – see my tag for reference.

Add your elements.  I used:
E59:  Resize 70%/Mirror/Duplicate
E54: We’ll add snow effect later in the tutorial.
E31:  Resize 80%
E33:  Resize 65%/Mirror
E36:  Resize 65%
E57:  Resize 70%
E40:  Resize 55%
E63
E41:  Resize 40%/Use your Pick Tool to rotate just a little
E52:  Resize 15%/Use your Pick Tool to tilt it just a little
E51:  Resize 15%/Use your Pick Tool to tilt it just a little/Duplicate

Highlight your white background.
New Raster layer.
Select All.
Copy and paste Paper 14 Into Selection.
Deselect.
Apply the mask.
Merge Group.
I had to move my mask just a little to center it more behind the tag.

Add your credits.

Add your name.
Foreground: #275128
Background:  #aa292b
Stroke: 1
Type your name.
Give it a slight Inner Bevel:

Apply Eyecandy 5: Nature – Snow Dift
Settings Tab:
Small, First flakes

Basic Tab:
OK

To make your name look as if it’s sitting in the snow:
Open up element 63.
Use your Freehand selection Tool set on Free hand and section off along the top area of the snow:

Copy.

Highlight your working canvas.
Paste as new layer.
Move it into position near the bottom of your name.
You can also use pieces of this element to make the baubles, reindeer feet, and Santa’s boots look as if they’re sitting in the snow, too.

Highlight the striped pole layer.
Apply the same snow effect accept change the settings on the basic tab to match mine:

Resize all layers 80%.

I’d love to see your results.
Email me!
Hugs,
Bev
 

~♥~ Gallery 2014~♥~

~♥~ Credits ~♥~

Kit Used: Sunshine by Lisete Scrap


Blog Installation and Customization By: Krissy of Krissy's Scraps & Imaging

  © Blogger template Customization and Installation by Krissy's Scraps 2011

Back to TOP